We never sell your data to third parties
Dodge 123820 P2B-SC-203 two-bolt pillow block bearing with 2-3/16" bore, set screw locking, standard duty ball bearing insert, and cast iron housing. Non-expansion fixed design with DualGuard seals and flingers for general purpose applications. Relubricatable, powder coated finish, 211 series.
MODEL P2B-SC-203
Contact supplier for technical support on: +1-864-284-5700
$198.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
211 series
Base to center height
2.5000 in, 63.5 mm
Bearing type
Ball, ball
Bolt centerline range
6 3/8 inch - 7 7/16 inch
Bolt Diameter
0.6250 in
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
2 3/16 in
Bore Diameter
2-3/16 inch
Bore length
2.2200 in, 56.388 mm
Duty
Standard Duty
Duty Rating
Standard duty ball bearing
Expansion
Non-expansion (fixed)
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
2 3/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65-degree set screw
Lubrication type
Grease
Material
Steel
Max Speed
2500 RPM operating limit
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Seals
DualGuard single lip seals
Sensor ready
Adapter required
Series
211 series bearing ring
Shaft attachment
Setscrew
Shaft centerline height
2 1/2 in
Shaft diameter
2.1875 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 123820
- Engineering Number: P2B-SC-203
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 2-3/16" (55.562mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 7.3100 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123389
Brand
Dodge
Model
P2B-SC-203
#130121
Brand
Dodge
Model
P2B-SC-207-HT
#5904119
Brand
Dodge
Model
P2B-DLM-115-LL
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#421923
Brand
SealMaster
Model
700200
#130979
Brand
Dodge
Model
P2B-VSC-203
#498243
Brand
Link-Belt
Model
10413991
#326903
Brand
SKF Bearing
Model
SY 2.3/16 TF
#2271884
Brand
Browning
Model
767967
#2364097
Brand
Link-Belt
Model
10418608
#132409
Brand
Dodge
Model
P2B-DLAH-203
#2272235
Brand
Browning
Model
767485
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/