We never sell your data to third parties
Dodge 058622 P2B-SCB-108-NL two-bolt pillow block ball bearing with 1-1/2" bore, set screw locking, cast iron housing, 208 series, DualGuard seals with flingers, no-lube sealed design, non-expansion fixed type, standard duty, powder coated finish, for general purpose applications.
MODEL P2B-SCB-108-NL
Contact supplier for technical support on: +1-864-284-5700
$144.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
208 series
Base to center height
1.9400 in, 49.276 mm
Bearing Series
208 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.1800 in, 131.572 mm
Bore
1 1/2 in
Bore Diameter
1-1/2"
Bore length
1.9400 in, 49.276 mm
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Finish
Powder coated
Greasable
No
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
1 1/2 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
Set screw (65° angle
Lubrication type
Grease
Material
Steel
Max Speed
3500 RPM
Maximum Speed
3500 RPM
Relubrication
No
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sealing
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.5000 in
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 058622
- Engineering Number: P2B-SCB-108-NL
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 1-1/2" (38.1mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Modifications: No-Lube Sealed
- Weight: 4.5000 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#123420
Brand
Dodge
Model
P2B-SCB-108-NL
#792193
Brand
Dodge
Model
128356
#132908
Brand
Dodge
Model
P2B-SCEZ-107-PCR
| Brand | MROSupply Fasteners |
| Model | FSTPCK-451460 |
| Brand | Starrett |
| Model | 483MXRL-25 |
| Brand | Gates Rubber |
| Model | 5/8V5600 |
| Brand | Wiegmann |
| Model | FF449CFM230VG |
| Brand | Precision Twist Drill |
| Model | 502-12E |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/