We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 064121 P2B-SCMAH-108-FF two-bolt pillow block bearing with 1-1/2" bore, 65 degree set screw locking, medium duty cast iron housing, air handling application, FDA food grade compliance, 209 series. 1-1/2" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Air Handling applications
MODEL P2B-SCMAH-108-FF
Contact supplier for technical support on: +1-864-284-5700
$183.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Air handling
Ball bearing series
209 series
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
6.1900 in, 157.226 mm
Bolt to bolt min
5.5000 in, 139.7 mm
Bore
1 1/2 in
Bore length
1.9400 in, 49.276 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
300 RPM
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
Single-lip seal with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.5000 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 1-1/2" (38.1mm) with 209 series bearing
- Locking Mechanism: 65 degree set screw for maximum holding force
- Duty Rating: Medium duty for heavier loads than standard
- Application: Air handling systems with FDA food grade compliance
- Expansion Type: Non-expansion (fixed) bearing configuration
- Weight: 6.0 lbs
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#123704
Brand
Dodge
Model
P2B-SCMAH-108-FF
#123627
Brand
Dodge
Model
P2B-SCMAH-207-FF
#792193
Brand
Dodge
Model
128356
#122519
Brand
Dodge
Model
LD-20X12-TUFR
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/