We never sell your data to third parties
Dodge 129149 P2B-GT-40M 40mm bore two-bolt pillow block ball bearing with Grip Tight adapter mount for standard duty, featuring cast iron housing, DualGuard seals with flingers, and non-expansion design for general purpose applications. Grip Tight adapter provides 360° shaft contact without marring, while relubrication capability extends service life.
MODEL P2B-GT-40M
Contact supplier for technical support on: +1-864-284-5700
$169.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Base to center height
2.1300 in, 54.102 mm
Bearing type
Ball, ball
Bolt to bolt max
5.8800 in, 149.352 mm
Bolt to bolt min
5.1800 in, 131.572 mm
Bore
40mm
Bore Diameter
40mm
Bore length
1.8400 in, 46.736 mm
Configuration
Non-expansion (fixed) bearing
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block bearing
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Relubrication
Yes
Rolling element
Standard duty ball
Rolling Element
Ball bearing
Seal option
DualGuard seals with flingers
Seal Type
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Shaft diameter
40.0000 mm
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 129149
- Engineering Number: P2B-GT-40M
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 40mm (40mm)
- Locking Type: Grip Tight
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 4.9600 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | PT Coupling |
| Model | 2770415 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/