We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 130778 LFT-SXV-25M two-bolt light duty flange bearing with 25mm bore, eccentric collar locking, alloy housing, 205 series ball bearing, DualGuard seals, 4500 RPM max speed, non-expansion configuration. 25mm bore 2-Bolt Light Duty Flange Ball Bearing with Eccentric Locking locking used in General Purpose applications
MODEL LFT-SXV-25M
Contact supplier for technical support on: +1-864-284-5700
$67.69 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
205 series
Bearing type
Ball, ball
Bolt Diameter
0.3438 in
Bore
25mm
Bore length
1.2200 in, 30.988 mm
Duty
Light Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Alloy
Housing option
Cast iron
Housing type
Two-bolt flange (light duty)
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
4500 rpm
Relubrication
Yes
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
25.0000 mm
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Type
2-bolt light duty flange
- Housing Type: Two-bolt light duty flange mount (LFT)
- Bore Diameter: 25mm
- Locking Type: Eccentric collar (SXV) - quarter-turn collar locks in rotation direction
- Housing Material: Alloy construction
- Duty Rating: Light duty for standard industrial applications
- Bearing Series: 205 series ball bearing
- Seal Type: DualGuard seals with flingers
- Max Speed: 4500 RPM
- Configuration: Non-expansion (fixed) bearing
- Weight: 0.89 lbs
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Face Runout/OD is the variation of the outside surface generatrix inclination with the face. This tolerance is meant to help ensure the outer ring of the bearing is close enough to a right angle with the face of the outer ring. The figures for the face runout/OD are provided for P4 and P5 grades. Note that all points on a single circle of the outside ring bore adjacent to the face are calculated based on one revolution. However, the inner ring must remain stationary. Then, the bearing is turned over and the outer side of the ring measured. Finally, the largest measurement is taken away from the smallest to get runout/OD bore tolerance.
Read More
#123363
Brand
Dodge
Model
P2B-SC-012
#128687
Brand
Dodge
Model
LFT-SXV-25M
#123535
Brand
Dodge
Model
P2B-SCAH-012
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
| Brand | Saginaw Control |
| Model | SCE-20N20MPP |
| Brand | Rocky Mountain Twist |
| Model | 95006421 |
| Brand | JET Tools |
| Model | 751015 |
| Brand | Bevel Tools |
| Model | 2131110 |
| Brand | Bestorq |
| Model | 5V1120 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/