We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 125859 P2B-SC-55M two-bolt pillow block bearing with 55mm bore diameter. Set screw locking mechanism, standard duty rating, cast iron housing. Non-expansion (fixed) design with DualGuard seal. 211 series ball bearing for industrial applications. 55mm bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-55M
Contact supplier for technical support on: +1-864-284-5700
$218.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
211 series
Base to center height
2.5000 in, 63.5 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
55mm
Bore length
2.2200 in, 56.388 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
55 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max Speed
2500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
55.0000 mm
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block (P2B) cast iron construction
- Bore Diameter: 55mm
- Locking Mechanism: 65-degree set screw for maximum shaft grip
- Duty Rating: Standard duty for general industrial applications
- Expansion Type: Non-expansion (fixed) bearing
- Sealing: DualGuard single lip seal with rubberized flinger
- Series: 211 series ball bearing insert
- Max Speed: 2,500 RPM
- Weight: 7.31 lbs
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#128762
Brand
Dodge
Model
P2B-SC-55M
#5904119
Brand
Dodge
Model
P2B-DLM-115-LL
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#130121
Brand
Dodge
Model
P2B-SC-207-HT
#2257349
Brand
SealMaster
Model
709924
#125531
Brand
Dodge
Model
P2B-DL-55M
| Brand | NTN Bearing |
| Model | SUCF207-23CC |
| Brand | Regal Cutting Tools |
| Model | 073415MS |
| Brand | Precision Twist Drill |
| Model | 2AB3.1 |
| Brand | Cleveland |
| Model | C80391 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/