We never sell your data to third parties
Dodge 125934 P2B-SCM-75M two-bolt pillow block bearing with 75mm bore, set screw medium duty locking, cast iron housing, non-expansion design. Features DualGuard seals with flingers, 1000 RPM rated, 216 series insert. 75mm bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCM-75M
Contact supplier for technical support on: +1-864-284-5700
$476.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
216 series
Base to center height
3.5000 in, 88.9 mm
Bearing Series
216 series ball bearing insert
Bearing type
Ball, ball
Bolt centerline range
215.5 mm - 241.3 mm
Bolt Diameter
0.8750 in
Bolt to bolt max
9.5000 in, 241.3 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
75 mm
Bore Diameter
75mm
Bore length
2.3800 in, 60.452 mm
Duty
Medium duty
Duty Rating
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
75 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
Set screw medium duty (65° angle)
Lubrication type
Grease
Material
Steel
Max RPM
2500 RPM
Max Speed
1000 RPM
Maximum Speed
1000 RPM rated
Relubrication
Yes
Rolling element
Medium duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sealing
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
88.9 mm
Shaft diameter
75.0000 mm
Standoff housing
No
Static load capacity
13102 lbf, 58280.6 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50,TS-400
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 75mm
- Locking Type: Set screw medium duty (65° angle)
- Duty Rating: Medium duty for heavier loads than standard
- Expansion Type: Non-expansion (fixed) - locates shaft position
- Sealing: DualGuard seals with flingers for contamination protection
- Bearing Series: 216 series ball bearing insert
- Maximum Speed: 1000 RPM rated
- Applications: General industrial machinery, conveyors, fans, pumps requiring medium duty performance
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#131805
Brand
Dodge
Model
P2B-SCM-215-HT
#128790
Brand
Dodge
Model
P2B-SCM-75M
#2247206
Brand
Dodge
Model
127340
| Brand | Drillco |
| Model | 70S004DC |
| Brand | Irwin Tools |
| Model | 372656P5 |
| Brand | JW Winco |
| Model | 12TWP6 |
| Brand | Magnetics |
| Model | 926 |
| Brand | Magnetics |
| Model | 922RM |
| Brand | Whitney Tool |
| Model | 42229 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/