We never sell your data to third parties
Dodge 128711 P2B-DL-110L two-bolt pillow block bearing with 1-5/8" (41.275mm) bore, D-Lok concentric clamp collar locking, standard duty cast iron housing, 209 series, non-expansion fixed mount, DualGuard seals with flingers. 1-5/8" bore Pillow Block 2-Bolt Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL P2B-DL-110L
Contact supplier for technical support on: +1-864-284-5700
$177.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
209 series
Base to center height
2.1300 in, 54.102 mm
Bearing Series
209 series ball bearing
Bearing type
Ball, ball
Bolt centerline range
5.44 inch - 6.06 inch
Bolt Diameter
0.5000 in
Bolt to bolt max
6.1900 in, 157.226 mm
Bolt to bolt min
5.5000 in, 139.7 mm
Bore
1 5/8 in
Bore Diameter
1-5/8" exact
Bore length
2.0100 in, 51.054 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 5/8 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Material
Steel
Max RPM
5000 rpm
Max Speed
5000 rpm
Measure system
Imperial
Mounting
Non-expansion (fixed)
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sealing
DualGuard single lip seal
Sensor ready
Adapter required
Shaft attachment
Clamp collar
Shaft centerline height
2.13 inch
Shaft diameter
1.6250 in
Standoff housing
No
Static load capacity
4906 lbf, 21822.975 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5903862
Brand
Dodge
Model
P2B-SCFS-104-SHFS
#130319
Brand
Dodge
Model
P2B-DL-110L
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#132908
Brand
Dodge
Model
P2B-SCEZ-107-PCR
#2257360
Brand
SealMaster
Model
705381
| Brand | Pramet |
| Model | 6803609 |
| Brand | Drillco |
| Model | 350N119 |
| Brand | Irwin Tools |
| Model | M444S4N |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/