We never sell your data to third parties
Dodge 057475 FC-DLM-215 piloted flange bearing with 2-15/16" bore, D-Lok concentric clamp collar, medium duty cast iron housing, DualGuard seals. Non-expansion bearing for industrial applications. 2-15/16" bore 4-Bolt Piloted Flange Ball Bearing with Concentric Collar locking used in General Purpose applications
MODEL FC-DLM-215
Contact supplier for technical support on: +1-864-284-5700
$712.76 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
216 series
Bearing type
Ball, ball
Bolt circle
7.5000 in, 190.5 mm
Bolt Diameter
0.6250 in
Bore
2 15/16 in
Bore length
2.6200 in, 66.548 mm
Duty
Medium duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Piloted flange
I.D.
2 15/16 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Concentric collar
Lubrication type
Grease
Max RPM
2500 RPM
Max Speed
2500 RPM
Pilot depth
1.2500 in, 31.75 mm
Pilot diameter
6.3750 in, 161.925 mm
Relubrication
Yes
Rolling element
Medium duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Clamp collar
Shaft diameter
2.9375 in
Standoff housing
No
Static load capacity
13102 lbf, 58280.6 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt piloted flange
- Housing Type: Piloted flange (FC) with machined pilot for precise mounting
- Bore Diameter: 2-15/16" (74.612mm) precise bore size
- Locking Type: D-Lok concentric clamp collar - single Allen wrench tightening
- Duty Rating: Medium duty for heavier loads than normal duty bearings
- Housing Material: Cast iron construction for durability
- Bearing Series: 216 series medium duty ball bearing
- Seal Type: DualGuard single lip seals with rubberized flingers
- Expansion Type: Non-expansion (fixed) - locates shaft position
- Applications: Industrial equipment requiring precise piloted mounting with heavy-duty performance
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5003229
Brand
Dodge
Model
P2B-DL-25M-LLS
#126948
Brand
Dodge
Model
P2B-VSCB-012
#123363
Brand
Dodge
Model
P2B-SC-012
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#2218137
Brand
Dodge
Model
P2B-DL-20M-HTS
| Brand | Remke |
| Model | RSP-208-E |
| Brand | Edwards |
| Model | TD90/2X6.5 |
| Brand | PEER Bearing |
| Model | 88504 |
| Brand | ABB |
| Model | MS325-1.6 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/