We never sell your data to third parties
Dodge 123809 P2B-SC-103 two-bolt pillow block ball bearing with 1-3/16" bore, 65° set screw locking, cast iron housing, DualGuard seals, 206 series wide inner ring, non-expansion fixed configuration for shaft positioning. Standard duty, 6500 rpm max, 1-5/8" shaft centerline height, 4-1/4" to 5" bolt centerline range. Relubricatable steel insert for general purpose applications.
MODEL P2B-SC-103
Contact supplier for technical support on: +1-864-284-5700
$96.08 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
206 series
Base to center height
1.6300 in, 41.402 mm
Bearing Series
206 series
Bearing type
Ball, ball
Bolt centerline range
4 1/4 inch - 5 inch
Bolt Diameter
0.5000 in
Bolt to bolt max
5.0000 in, 127.0 mm
Bolt to bolt min
4.2500 in, 107.95 mm
Bore
1 3/16 in
Bore Diameter
1-3/16"
Bore length
1.5200 in, 38.608 mm
Configuration
Non-expansion (fixed)
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast iron (Class 25/30)
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
1 3/16 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65 degree set screw
Lubrication type
Grease
Material
Steel
Max RPM
6500 rpm
Max Speed
6, 500 RPM
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Rolling Element
Standard duty ball bearing
Seal
Single lip
Seal option
DualGuard seals with flingers
Seal Type
DualGuard
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
1 5/8 inch
Shaft diameter
1.1875 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-20,TS-250
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 123809
- Engineering Number: P2B-SC-103
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 1-3/16" (30.162mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Housing Material: Steel
- Expansion Type: No
- Seal Type: DualGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 2.4500 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#122519
Brand
Dodge
Model
LD-20X12-TUFR
#5903862
Brand
Dodge
Model
P2B-SCFS-104-SHFS
#131745
Brand
Dodge
Model
P2B-SC-103
#127074
Brand
Dodge
Model
P2B-SCEZ-107-P
#5002831
Brand
Dodge
Model
P2B-SCAH-103 MODS
| Brand | Irwin Tools |
| Model | 99911 |
| Brand | Remke |
| Model | RSR-9622-E |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/