We never sell your data to third parties
Dodge 123630 F4B-VSC-108 four-bolt flange mount ball bearing with 1-1/2" bore. Intermediate duty setscrew locking, cast iron housing, DualGuard seal, 208 series. Non-expansion fixed bearing for general industrial applications requiring secure surface 1-1/2" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in General Purpose applications
MODEL F4B-VSC-108
Contact supplier for technical support on: +1-864-284-5700
$85.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
General Purpose
Ball bearing series
208 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
4.0000 in, 101.6 mm
Bolt to bolt min
4.0000 in, 101.6 mm
Bore
1 1/2 in
Bore length
1.9400 in, 49.276 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Polymer
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
50 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
5000 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.5000 in
Standoff housing
No
Static load capacity
4475 lbf, 19905.792 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt square flange mount for surface mounting
- Bore Diameter: 1-1/2" (38.1 mm)
- Locking Type: 65° setscrew for positive shaft attachment
- Duty Rating: Intermediate duty VSC for moderate load applications
- Housing Material: Cast iron construction
- Bearing Series: 208 series ball bearing insert
- Seal Protection: DualGuard seal system with flingers
- Expansion Type: Non-expansion (fixed) bearing
- Application: General purpose industrial machinery requiring flange mounting
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#5785450
Brand
Dodge
Model
P2B-SC-20M-HT
#125286
Brand
Dodge
Model
P2B-SXVB-012
#125539
Brand
Dodge
Model
P2B-DL-012
#5002792
Brand
Dodge
Model
P2B-SC-20M-NLS
#123364
Brand
Dodge
Model
P2B-SC-012-NL
#2271796
Brand
Browning
Model
767342
#2258454
Brand
SealMaster
Model
724100
#12245
Brand
AMI Bearings
Model
UCF208-24C4HR5
#794279
Brand
AMI Bearings
Model
BF208-24
#276920
Brand
NTN Bearing
Model
ARFU-1.1/2
| Brand | SEW Eurodrive |
| Model | SA47/T DRN80M4 SO # 87.8335425601.0001.23.60 |
| Brand | Consolidated Bearings |
| Model | LS-5 |
| Brand | RAB Lighting |
| Model | T34-2X4-50N/D10 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/