MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Carter CNB-128-SB 4.00" Needle Cam Follower Sealed, Hex Sealed, Hex
MODEL CNB-128-SB
Contact supplier for technical support on: 616 842 8760
$295.20 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Basic dynamic rating (lbf)
29985
Limiting speed (RPM)
700
Lube fitting size
1/4
M.E.T.
1 1/2
Max static capacity (lbf)
44770
Min boss diameter
2 9/32
Mounting bore diameter
1.500
Oil hole center
3/4
Oil hole diameter
1/8
Recom torque (in/pound)
2500
Roller O.D.
4.000
Roller width
2.250
Stud diameter
1.500
Stud length
3.500
Stud Length
3.5
Thread class 2A
1 1/2-12
Standard Needle Bearing Cam Followers and Cam Yoke Rollers
Carter Standard Type bearings are easily mounted and ideally suited for many cam or track roller applications with moderate loading and shock. The bearings are sealed to help prevent contamination and retain lubrication. This Standard Type is recommended for applications where the stud hole can be accurately machined to within +.0000" and -.0005". For other applications where these tolerances cannot be held to these limits, the Eccentric Type is recommended.
The outer race on Carter Cam Followers is high carbon chrome bearing steel thrrough-hardened and ground. The studs and inner races are low carbon alloy steel carburized and induction hardened. A zone hardened raceway leaves the shank end ductile. The needle rollers are high carbon chrome bearing steel through-hardened and ground.
Carter Needle Bearing Cam Followers are available as sealed bearings with a slotted head, a hexagonal socket, or a crowned O.D. Carter also offers sealed or unsealed needle bearing Cam Yoke Rollers for supporting heavier loads.
TYPES
Sealed with Slotted Head
Type CNB-S is the Standard Type having a slotted head which normally supplies sufficient turning ability for installing this type of bearing.
Sealed with Hexagonal Socket
Type CNB-SB provides the ease of installing with a hex wrench which may be desired particularly on the larger sizes.
Sealed with Crowned O.D.
Type CCNB-S is recommended wherever variations in dimensions of alignment of the tracks or cam might cause excessive angular loading. It reduces thrust on the rollers and wear, and aids reliability.
Eccentric Stud
Type CNBE is designed for applications where holding close tolerances of the mounting holes may prove difficult. Available in slotted or hexed versions. The eccentric bushing is made of cold drawn steel so you can drill or dowel through the housing and into the stud for permanent locking. In most cases, the clamping action of the mounting nut is sufficient.
#2249550
Brand
McGill Bearing
Model
CF 4 SB
#2787311
Brand
PCI
Model
SCF-4.00-S
#2788592
Brand
Smith Bearings
Model
CR-4-XB
#1496213
Brand
Koyo Bearing
Model
CRS-64
| Brand | SIEGMA |
| Model | 5IK60RGN-HFT/5GU180RC |
| Brand | WEG |
| Model | D29142 |
| Brand | NTN Bearing |
| Model | LUB-ANGLE90-1/8 |
| Brand | Dixon |
| Model | G1000E |
| Brand | NTN Bearing |
| Model | UCUP204-012D1 |
| Brand | Harwal |
| Model | VS-160V |
| Brand | Consolidated Bearings |
| Model | SR-22217-2RS C/3 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-351500 |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/