We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF F2B 010-FM 2-bolt cast-iron flange bearing unit for 5/8 inch shaft. Pre-lubricated insert bearing in a durable cast-iron housing. Designed for light to moderate radial loads in conveyor and fan applications.
MODEL F2B 010-FM
$47.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
For material handling applications
Attachment Bolt Diameter
9.525 mm
Basic Dynamic Load Rating
9.56 kN
Basic Static Load Rating
4.75 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
76.2 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Flanged Housing Type
Oval
Grease Fitting
With
Hexagonal Key Size for Set Screw
3.175 mm
Housing
Cast iron
Housing Overall Width
24 mm
Housing Type
Flanged
Inner Ring Retaining Feature
Eccentric collar
Limiting Speed
9500 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
2
Pack Height
92 mm
Pack Length
92 mm
Pack Width
42 mm
Relubrication Hole
With
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
1/4-28 UNF
Set Screw Tightening Torque
4 N·m
Shaft Diameter
15.875 mm
Total Bearing Width
28.6 mm
Total Width
39.1 mm
Unit Sealing
Without
These oval flanged ball bearing units are compliant with North American standards. They consist of an insert bearing, with an extended inner ring and eccentric locking, intended primarily for use in applications where the direction of rotation is constant. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Resist high levels of contamination
- Designed for high temperatures and speeds
- Accommodate relatively heavy loads
- Cost-effective
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Pramet |
| Model | 6760518 |
| Brand | JET Tools |
| Model | 140018 |
| Brand | Remke |
| Model | 505E0164AR |
| Brand | ABB |
| Model | OT16FT3 |
| Brand | Drillco |
| Model | 92CT160 |
| Brand | Drillco |
| Model | 440E152 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF