MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF Bearing P2B 102-TF Mounted Unit Ball
MODEL P2B 102-TF
$82.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
For material handling applications
Attachment Bolt Diameter
12.7 mm
Basic Dynamic Load Rating
19.5 kN
Basic Static Load Rating
11.2 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal and flinger on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
120.65 mm
Centre Height (pillow Block)
42.86 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Grease Fitting
With
Hexagonal Key Size for Set Screw
3.175 mm
Housing
Cast iron
Housing Overall Width
44.600000046844 mm
Housing Type
Pillow block
I.D.
1 1/8 in
Inner Ring Retaining Feature
Set screws
Limiting Speed
6300 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
2
Pack Height
45 mm
Pack Length
160 mm
Pack Width
87 mm
Relubrication Hole
With
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
1/4-28 UNF
Set Screw Tightening Torque
4 N·m
Shaft Diameter
28.575 mm
Total Bearing Width
38.1 mm
Unit Sealing
Without
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, North American standards
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
- Strong
- Designed for a constant and alternating rotation
- Ready to mount
- Lubricated and sealed bearing
- Quick locking onto the shaft
- Cost-effective
#2272208
Brand
Browning
Model
767848
| Brand | Dixon Sanitary Fittings |
| Model | 14WLI-G200 |
| Brand | Stearns |
| Model | 502503100 |
| Brand | Dichtomatik |
| Model | 75172329 |
| Brand | Bando |
| Model | 4L530 |
| Brand | NTN Bearing |
| Model | SUCTBL208-24CCFG1 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF