We never sell your data to third parties
Dodge 137393 P2B-SCFS-012-SHFS two-bolt pillow block bearing with 3/4" bore, stainless steel housing, set screw locking, standard duty rating, 204 series ball bearing, DualGuard seals, non-expansion configuration. 3/4" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SCFS-012-SHFS
Contact supplier for technical support on: +1-864-284-5700
$229.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
204 series
Base to center height
1.3100 in, 33.274 mm
Bearing Series
204 series ball bearing insert
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.1900 in, 106.426 mm
Bolt to bolt min
3.3800 in, 85.852 mm
Bore
3/4 in
Bore Diameter
3/4" shaft size
Bore length
1.2300 in, 31.242 mm
Configuration
Non-expansion (fixed)
Duty
Standard Duty
Duty Rating
Standard duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
No
High temp
No
Housing
Stainless
Housing construction
Solid
Housing material
Stainless steel
Housing Material
Stainless steel
Housing option
Stainless steel
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
3/4
Insert material
Plated stainless steel
Insert option
Plated stainless steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
950 RPM rating
Relubrication
Yes
Seal option
DualGuard seals with flingers
Seal type
Triple-lip contact
Sealing
DualGuard seals
Shaft attachment
Setscrew
Shaft diameter
0.7500 in
Standoff housing
No
Static load capacity
1482 lbf, 6592.264 N
Suitable for high temperature
No
Suitable for washdown
Yes
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with standard mounting pattern
- Bore Diameter: 3/4" (19.05mm) shaft size
- Locking Type: Set screw with 65 degree angle for maximum holding power
- Housing Material: Stainless steel for corrosion resistance
- Duty Rating: Standard duty for general industrial applications
- Bearing Series: 204 series ball bearing insert
- Configuration: Non-expansion (fixed) design
- Sealing: DualGuard seals with flingers for contamination protection
- Max Speed: 950 RPM rating
- Applications: Ideal for washdown environments, food processing, marine applications requiring corrosion resistance
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#126986
Brand
Dodge
Model
128974
#125539
Brand
Dodge
Model
P2B-DL-012
#5903847
Brand
Dodge
Model
P2B-SCFS-012-SHFS
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/