We never sell your data to third parties
Dodge 076060 F4B-SCED-207 four-bolt flange mounted ball bearing with 2-7/16" bore (61.912mm). Extreme duty setscrew locking, Grade 10 balls, QuadGuard seal, cast iron housing, 212 series. Fixed non-expansion design for surface mounting. 2-7/16" bore 4-Bolt Flange Ball Bearing with Set Screw locking used in Dirty & Dusty Environment applications
MODEL F4B-SCED-207
Contact supplier for technical support on: +1-864-284-5700
$264.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
Dirty & dusty environment
Ball bearing series
212 series
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
5.6300 in, 143.002 mm
Bolt to bolt min
5.6300 in, 143.002 mm
Bore
2 7/16 in
Bore length
2.3100 in, 58.674 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Four-bolt flange
I.D.
30 mm
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
2750 RPM
Max Speed
2000 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
2.4375 in
Standoff housing
No
Static load capacity
8100 lbf, 36030.595 N
Suitable for high temperature
No
Suitable for washdown
No
Type
4-bolt flange
- Housing Type: Four-bolt flange mount for surface mounting
- Bore Diameter: 2-7/16" (61.912mm)
- Locking Type: 65° setscrew locking mechanism
- Duty Rating: Extreme Duty with Grade 10 balls
- Housing Material: Cast iron construction
- Seal Protection: QuadGuard seal with flingers for enhanced protection
- Series: 212 series ball bearing
- Expansion Type: Non-expansion (fixed) design
- Max Speed: 2000 RPM
- Static Load: 8100 lbf (36031 N)
- Applications: Heavy-duty industrial applications requiring extreme duty performance
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2217984
Brand
Dodge
Model
P2B-SXRED-207S
#128116
Brand
Dodge
Model
P2B-SCH-207-E
#5002731
Brand
Dodge
Model
P2B-SCB-207-HTS
#5003440
Brand
Dodge
Model
P2B-DLED-207S
#791548
Brand
Dodge
Model
F4B-SCED-207
| Brand | Pramet |
| Model | CNMG 433-NM:T8330 |
| Brand | Bondhus |
| Model | 26266 |
| Brand | TB Woods |
| Model | 14H100MPB |
| Brand | Bondhus |
| Model | 28070 |
| Brand | Bestorq |
| Model | 2/B79 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/