We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 136812 LF-SCEZ-104S-SHSS three-bolt light duty flange bearing with 1-1/4" bore, E-Z Kleen stainless steel housing and insert, set screw locking, QuadGuard seal. 206 series ball bearing for corrosive washdown applications. 1-1/4" bore 3-Bolt Light Duty Flange Ball Bearing with Set Screw locking used in Washdown applications
MODEL LF-SCEZ-104S-SHSS
Contact supplier for technical support on: +1-864-284-5700
$239.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
206 series
Bearing type
Ball, ball
Bolt circle
3.5600 in, 90.424 mm
Bolt Diameter
0.4063 in
Bore
1 1/4 in
Bore length
1.5200 in, 38.608 mm
Duty
Light Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Stainless steel
Housing option
Stainless steel
Housing type
Three-bolt flange (light duty)
Insert material
Stainless steel
Insert option
Stainless steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
3-bolt light duty flange
- Housing Type: Light duty three-bolt flange (LF)
- Bore Diameter: 1-1/4" (31.75 mm)
- Locking Type: 65° set screw locking (SCEZ)
- Housing Material: 304 stainless steel cast housing
- Insert Material: Stainless steel insert
- Duty Rating: Light duty for moderate loads
- Corrosion Protection: E-Z Kleen series for washdown environments
- Seal Type: QuadGuard triple lip seal with stainless flinger
- Bearing Series: 206 series ball bearing
- Applications: Food processing, pharmaceutical, washdown areas requiring corrosion resistance
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123363
Brand
Dodge
Model
P2B-SC-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#5002792
Brand
Dodge
Model
P2B-SC-20M-NLS
| Brand | Jason Industrial |
| Model | 322L050 |
| Brand | Jason Industrial |
| Model | 800SLV3-8M27 |
| Brand | Jason Industrial |
| Model | 50T10/1420DL |
| Brand | PTI |
| Model | SRE-PB4-85MMR3XP-DC |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/