We never sell your data to third parties
Dodge 079814 P2B-SL-010 light duty pillow block bearing with 5/8" bore, 65 degree setscrew locking, stamped steel housing, DualGuard seals. 203 series ball bearing insert for standard applications. 5/8" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SL-010
Contact supplier for technical support on: +1-864-284-5700
$43.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
203 series
Base to center height
0.8800 in, 22.352 mm
Bearing type
Ball, ball
Bolt Diameter
0.2500 in
Bolt to bolt max
2.6900 in, 68.326 mm
Bolt to bolt min
2.6900 in, 68.326 mm
Bore
5/8 in
Bore Diameter
5/8" with 203 series ball bearing insert
Bore length
1.0000 in, 25.4 mm
Duty
Standard Duty
Duty Rating
Light duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Stamped Steel
Housing construction
Solid
Housing material
Stamped Steel
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-bolt pillow block
I.D.
5/8
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Mechanism
65 degree setscrew
Lubrication type
Grease
Relubrication
Yes
Rolling Element
Ball bearing
Seal option
DualGuard seals with flingers
Seal type
Labyrinth
Sealing
DualGuard seals
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
0.6250 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10
Type
Pillow block 2-Bolt
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125539
Brand
Dodge
Model
P2B-DL-012
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#5785474
Brand
Dodge
Model
P2B-SL-010
#126948
Brand
Dodge
Model
P2B-VSCB-012
| Brand | Bestorq |
| Model | 10/B136 |
| Brand | Dichtomatik |
| Model | 75023264 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/