Call (888)-671-2883
 on most items
Text message to Live Chat! (201) 898 - 2676

FENNER B402306 B-LOC B400 3-3/8"

BRAND: Fenner Drives | MODEL: B402306 | CONDITION: NEW | SKU: 817832
FENNER B402306 B-LOC B400 3-3/8"

Image for Illustration purposes only,
Actual product may vary
Typically In Stock: confirm availability
Returnable: see conditions
Shipping from?: see locations Typically ships in 1 day
Weight: 3.20 lbs UOM: EA

Additional Description




The B-LOC B400 Series 3-3/8” Keyless Bushing provides a high capacity, zero-backlash shaft to hub connection for shafts measuring 3-3/8” in diameter by means of a mechanical interference fit and transmits up to a maximum of 6082 ft lbs of torque.

Best Suited For: Applications that require a recessed installation of the bushing with no axial movement of the mounted component relative to the shaft during tightening.

B-LOC B400 Series 3-3/8” Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Their self-releasing double taper design permits simple adjustment and removal and there is no axial movement during installation. Since the B-LOC B400 Series Keyless Bushings do not have a flange, the external diameter along the unit’s entire length is the same, therefore allowing the unit to be completely inserted into the component bore for flushed or recessed mounting.

• Self-releasing double taper design permits simple adjustment and removal
• No axial movement during installation
• Recessed installation without the need for a counterbore

Note: This product is not self-centering but Fenner Drives offers pilot bushings that provide pre-centering when required. The pilot bushings are supplied in sets of three (3) bushings and three (3) longer screws (replace plated locking screws).

Features of Fenner Drives Keyless Bushings:

• Ability to transmit higher torques
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal

All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.

Series: B400
Torque Transmission: 6082
Axial Movement: No
Bore Tolerance: 4.925
Component Bore Diameter: 4.921"
Hub Pressure: 24672
Installation Torque: 51 ft lb
Internal/ External: Internal
Material: Steel
Metric/Inch: Inch
Releasing/ Locking: Releasing
Screw Size: M10 x 25
Self-Centering: No
Shaft Diameter: 3 3/8"
Shaft Tolerance: 3.371
Taper: Double
Thrust: 43250