We never sell your data to third parties
Leeson M1125275.00 0.13 HP, 42 RPM DC gearmotor with 31 frame and Totally Enclosed Non-Ventilated (TENV) enclosure. Operates on 90V DC with Class F insulation, ball bearings, and 0.625-inch shaft diameter. Designed for low-speed, high-torque DC applications.
MODEL M1125275.00
$682.52 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Current
2.2
Drive End Bearing Size
6201
Drive End Bearing Type
Ball
Duty
Continuous
Efficiency
19
Enclosure
TENV
Frame
31
Frame Length
3.94
Height
5.63
HP
0.13
Insulation Class
F
KW
0.10
Length
15.25
Opp. Drive End Bearing Size
6201
Opp. Drive End Bearing Type
Ball
RPM
42
Service factor
1
Shaft Diameter
0.625
Shaft Length
1.8
Shaft type
Right Angle
Thermal protection
No Protection
UL
Recognized
Voltage
90
Width
7.13
Leeson WASHGUARD
motors are designed for extended life in applications requiring regular washdown or otherwise wet environments. WASHGUARD motors retard the entrance of water. Extra protection for the motor’s interior prevents rust and corrosion build-up and releases trapped moisture to insure a longer life than possible with a standard motor. For optimum seal life, these right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other mountings, the breather plug must be reoriented by using a 90 1/8 NPT taper pipe elbow. See page 97 or 106 for diagram. Overhung load capacities shown are at center of the output shaft. The motor’s stall torque exceeds recommended full load torques for the gearboxes. A current limiting device should be used to prevent damage to the gear sets.
Gearbox output shafts are 303 stainless steel. Frame, endshields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalies and oil. Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out. The conduit box cover is made from 304 stainless steel. For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided. All hardware is stainless steel. Motor painted with epoxy for superior corrosion resistance and protection. Machined fits between the endbells and motor frame are sealed with gaskets. Thru-bolt heads and nuts sealed with fiber washers. O-rings under each threaded brush cover. This worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and quiet operation. Precision machined aluminum housings are used. Gearbox has all ball bearings. The housing is sealed and lubrication is permanent with an oil bath.
SKU: 2526415
Thanks
The motor was sent in record time and is now on the compressor and working great Thank You
Read moreSKU: 726526
Staff assistance - leeson 1.5hp x 2 boat lift motors
I am just now installing these 2 quality motors. This review is more for the staff at MRO Supply. One of my 2 existing motors died just as my boat was barely high enough to be firmly on the lift at high tide. The replacement was out of stock. Within 24 hours I was helped with the various options, pricing and then a very quick turn around to get my order shipped. Free shipping was FedEx Ground and I had my motors in 3 days from my first order submission. Outstanding and knowledgeable assistance from the the team at MRO. THANK YOU!
Read moreSKU: 226535
Electric motor
motor looks great just received today motor brand is different Lincoln It should be fine
Read more
#227489
Brand
Leeson
Model
M1135108.00
#227494
Brand
Leeson
Model
M1135113.00
#227491
Brand
Leeson
Model
M1135110.00
#227497
Brand
Leeson
Model
M1135116.00
#227495
Brand
Leeson
Model
M1135114.00
#227492
Brand
Leeson
Model
M1135111.00
#1327992
Brand
Electra/Grove Gear
Model
GR8130077.00
#227428
Brand
Leeson
Model
M1125277.00
| Brand | Bestorq |
| Model | 11/5V1320 |
SKU: 2526415
Thanks
The motor was sent in record time and is now on the compressor and working great Thank You
Read moreSKU: 726526
Staff assistance - leeson 1.5hp x 2 boat lift motors
I am just now installing these 2 quality motors. This review is more for the staff at MRO Supply. One of my 2 existing motors died just as my boat was barely high enough to be firmly on the lift at high tide. The replacement was out of stock. Within 24 hours I was helped with the various options, pricing and then a very quick turn around to get my order shipped. Free shipping was FedEx Ground and I had my motors in 3 days from my first order submission. Outstanding and knowledgeable assistance from the the team at MRO. THANK YOU!
Read moreSKU: 226535
Electric motor
motor looks great just received today motor brand is different Lincoln It should be fine
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/