Image for Illustration purposes only. Actual product may vary
FDL3737TM 10HP, 1730RPM, 1PH, 60HZ, 215T, 3752LC, TEFC, F
MODEL FDL3737TM
Contact supplier for technical support on: 323 724 6771
$2,983.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
L
Duty Rating
CONT
Enclosure
TEFC
Frame
215T
Frame Material
Steel
HP
10
Hz
60
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
172
Mounting Arrangement
F1
Number of Poles
4
Overall Length
21.27 in
Phase
1
Power Factor
96
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1
Shaft Diameter
1.375IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
230
| Output | 10 |
|---|---|
| RPM | 1730 |
| Pallet Quantity | 9 |
| Specification Number | 37M294T913 |
| Frame | 215T |
| Weight | 169. 000 LB |
| Multiplier | L1 |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 230 |
| Poles | 04 |
| Class | STOCK |
| Type | 3752LC |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | E |
|---|---|
| Status | PRD/A |
| Change # | 734932 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3752LC |
| Elec. Spec | 37WGT913 |
| CD Diagram | CD1336 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 37M294 |
| Layout | 37LYM294 |
| Frame | 215T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 1/7/2010 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/27/2012 |
| Leads | 2#10 A PH, 3#14 B PH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for FDL3737TM
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 37M294T913 | BALDOR/FT SMITH/REC WHSE #5 | 1/8/2010 | 52LC 4P TEFC HOR 215T MTO | |
| 37L675T913 | BALDOR/FT SMITH/REC WHSE #5 | 10/19/2006 | 52LC 4P TEFC HOR 215T MTO | |
| 37G872Y971 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 50LC 4P TEFC HOR 215T MTO | |
| 37G872Y971 | BALDOR/FT SMITH/REC WHSE #5 | 6/9/1999 | 50LC 4P TEFC HOR 215T MTO |
| Nameplate No. | NP1280L |
|---|---|
| CAT. NO. | FDL3737TM |
| SPEC. | 37M294T913 |
| HP | 10 |
| VOLTS | 230 |
| AMP | 39 |
| RPM | 1730 |
| FRAME | 215T |
| HZ | 60 |
| PH | 1 |
| SER. F. | 1. 00 |
| CODE | H |
| DES | L |
| CL | F |
| NEMA-NOM-EFF | 86. 5 |
| PF | 96 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6307 |
| ODE | 6206 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 30. 2 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 10 Amps |
| Break-Down Torque | 107. 2 LB-FT |
| Line-line Res. @ 25°C. | 0. 131 Ohms A Ph / 0. 388 Ohms B Ph |
| Pull-Up Torque | 78 LB-FT |
| Temp. Rise @ Rated Load | 93°C |
| Locked-Rotor Torque | 118 LB-FT |
| Temp. Rise @ S. F. Load | |
| Starting Current | 300 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 79 | 91 | 94 | 96 | 96 | 96 | 0 |
| Efficiency | 73. 9 | 84. 5 | 86. 8 | 86. 4 | 84. 1 | 81 | 0 |
| Speed (RPM) | 1784 | 1768 | 1751 | 1732 | 1707 | 1679 | 0 |
| Line Amperes | 13. 6 | 21 | 29. 5 | 39 | 50 | 62. 5 | 0 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA197054 | SA 37F877S115H1 | 1 EA |
| RA184492 | RA 37F877S115H1 | 1 EA |
| S/P101-000-000 | EPACT PROCEDURES-FS PLANT-POLYREX EM, NO | 1 EA |
| HA6361A01 | LIFTING LUG FOR 37, 39 & 40 FRAME (AUTOP | 2 EA |
| 09CB3002SP | CB W/1. 38 LEAD HOLE FOR 37, 39, 307 & 30 | 1 EA |
| HA6429 | KO BOX ADAPTER REXITE | 1 EA |
| 19XW2520A16 | SCREW, 1/4-20X1 TAPTITE-II OR ROLOC 91 | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 37EP3200A01SP | FR ENDPLATE, 37L&M, OPEN, MACH, W/GREASE | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HW5100A06 | W2420-025 WVY WSHR (WB) | 1 EA |
| 37EP3202A01 | STD PULLEY EP MODEL 37 OPEN 309 BRG | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| XY3118A12 | 5/16-18 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 | 1 EA |
| 51XW2520A10 | . 25-20 X. 62, TAPTITE II, HEX WSHR SLTD | 2 EA |
| HW2501G25 | KEY, 3/8 SQ X 2. 875 | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| WD1000B17 | KPA-8C BURNDY TERMINAL | 1 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 028 GA |
| HA3104A24 | THRUBOLT- 5/16-18 X14. 375 X | 4 EA |
| 37AD2001A01 | BAFFLE PLATE, STAMPED | 2 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C04 | STD-E (STOCK CTN LABEL STD-E WITH FLAG) | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP1256L | ALUM UL CSA CC | 1 EA |
| 37PA1052 | PALLET PACK GRP, 150 LB MTR 2 X 4 RUNNER | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier | |
|---|---|---|---|
| 37-1402 | C FACE KIT | A8 |
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25590
Fast!
Exact match to the motor I needed. Best price anywhere, and super fast FREE shipping! Gained a new customer!
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read moreBrand
Leeson
Model
140414.00
Brand
Leeson
Model
140706.00
Brand
Baldor
Model
L3712T
Brand
Leeson
Model
140581.00
Brand
Baldor
Model
FDL3712TM
Brand
Baldor
Model
DEL3737TM
Brand
Leeson
Model
141393.00
Brand
Century
Model
K302M2
| Brand | Consolidated Bearings |
| Model | 4313 |
SKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25590
Fast!
Exact match to the motor I needed. Best price anywhere, and super fast FREE shipping! Gained a new customer!
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/