We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Baldor ECP83587T-4 is a 2 HP, 1755 RPM, three-phase severe duty electric motor with a NEMA 145T frame (3.5-inch shaft height) and Totally Enclosed Fan Cooled (TEFC) enclosure. This IEEE 841-rated motor operates on 460V at 60 Hz, featuring NEMA Premium Super-E efficiency, a 1.15 service factor, and Class F insulation. Designed for demanding applications in oil & gas, chemical, and wastewater treatment, it includes cast iron construction and a 5-year warranty.
MODEL ECP83587T-4
Contact supplier for technical support on: 323 724 6771
$1,441.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Cast Iron
Design Code
B
Duty Rating
CONT
Enclosure
TEFC
Frame
145T
Frame Material
Iron
HP
2
Hz
60
Insulation Class
F
Inverter Code
Inverter Duty
Max Speed
2700 RPM
Motor Standards
NEMA
Motor Weight
78
Mounting Arrangement
F1
Number of Poles
4
Overall Length
12.87 in
Phase
3
Power Factor
74
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
0.875IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
460
| Output | 2 |
|---|---|
| RPM | 1755 |
| Pallet Quantity | 20 |
| Specification Number | 05E811W836G7 |
| Frame | 145T |
| Weight | 78. 000 LB |
| Multiplier | SD |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 460 |
| Poles | 04 |
| Class | STOCK |
| Type | 0535M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | F |
|---|---|
| Status | PRD/A |
| Change # | 790278 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 0535M |
| Elec. Spec | 05WGW836 |
| CD Diagram | CD0006 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 05E811 |
| Layout | 05LYE811 |
| Frame | 145T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 11/23/2010 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 3/13/2013 |
| Leads | 3#18 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for ECP83587T-4
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 05E811W836G7 | BALDOR/FT SMITH/REC WHSE #5 | 12/8/2010 | 35M 4P TEFC HOR 145T CHEM PROC SP#32-8 | |
| 05E811W650 | BALDOR/FT SMITH/REC WHSE #5 | 3/28/2008 | 32M 4P TEFC HOR 145T CHEM PROC SP#32-8 | |
| 05E811W743 | BALDOR/FT SMITH/REC WHSE #5 | 12/11/2006 | 33M 4P TEFC HOR 145T CHEM PROC SP#32-8 | |
| 05E811W650 | BALDOR/FT SMITH/REC WHSE #5 | 11/21/2005 | 32M 4P TEFC HOR 145T CHEM PROC SP#32-8 | |
| 05E408W650 | BALDOR/FT SMITH/REC WHSE #5 | 8/1/2001 | 32M 4P TEFC HOR 145T CHEM PROC SP#32-8 | |
| 05E408W251 | BALDOR/FT SMITH/REC WHSE #5 | 10/29/1999 | 35M 4P TEFC HOR 145T CHEM PROC SP#32-8 | |
| 05E272W251 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 35M 4P TEFC HOR 145T CHEM PROC SP#32-6 | |
| 05E272W251 | BALDOR/FT SMITH/REC WHSE #5 | 6/17/1999 | 35M 4P TEFC HOR 145T CHEM PROC SP#32-6 |
| Nameplate No. | NP2162E | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| CAT. NO. | ECP83587T-4 | ||||||||
| SPEC. | 05E811W836G7 | ||||||||
| SPEC. | 05E811W836G7 | ||||||||
| MOTOR WEIGHT | 64 LBS | ||||||||
| HP | 2 | ||||||||
| T. CODE | T3 | ||||||||
| GREASE | POLYREX EM | ||||||||
| VOLTS | 460 | ||||||||
| MAX. KVAR | . 67 | ||||||||
| AMP | 2. 8 | ||||||||
| # OF ROTOR BARS | 28 | ||||||||
| # OF STATOR SLOTS | 36 | ||||||||
| RPM | 1755 | ||||||||
| BLANK | |||||||||
| FRAME | 145T | HZ | 60 | PH | 3 | HTR-VOLTS | N/A | HTR-AMPS | N/A |
| SER. F. | 1. 15 | CODE | L | DES | B | CL | F | MAX. SPACE HEATER TEMP. | N/A |
| NEMA-NOM-EFF | 88. 5 | ||||||||
| PF | 75 | ||||||||
| G. MIN. EFF | 86. 5 | ||||||||
| CC | 010A | ||||||||
| RATING | 40C AMB-CONT | ||||||||
| DE | 6205 | ||||||||
| ODE | 6205 | ||||||||
| ENCL | TEFC | ||||||||
| SN | |||||||||
General Characteristics
| Full Load Torque | 6. 01 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 1. 64 Amps |
| Break-Down Torque | 26. 6 LB-FT |
| Line-line Res. @ 25°C. | 6. 46 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 20. 5 LB-FT |
| Temp. Rise @ Rated Load | 38°C |
| Locked-Rotor Torque | 21. 6 LB-FT |
| Temp. Rise @ S. F. Load | 47°C |
| Starting Current | 25 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 34 | 54 | 67 | 75 | 80 | 83 | 78 |
| Efficiency | 80 | 86. 9 | 88. 5 | 88. 6 | 87. 9 | 86. 8 | 88. 2 |
| Speed (RPM) | 1790 | 1779 | 1768 | 1756 | 1743 | 1729 | 1748 |
| Line Amperes | 1. 74 | 2. 01 | 2. 39 | 2. 83 | 3. 34 | 3. 88 | 3. 14 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA212891 | SA 05E811W836G7 | 1 EA |
| RA200120 | RA 05E811W836G7 | 1 EA |
| 34FN3002B01 | EXTERNAL FAN, PLASTIC, . 637/. 639 HUB W/ | 1 EA |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA |
| 06CB1001A01G | CONDUIT BOX, MACH GRAY | 1 EA |
| RM1016 | LEAD SEPARATOR GASKET - 305/306 C. P. MOTO | 1 EA |
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X. 75 | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 10XN2520S06 | 1/4 20X3/8 HX HD CAP S. S. | 2 EA |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 2 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| 05EP1100A02G | FREP TEFC 203, GRSR, RLF, DRAIN FITTING, INP | 1 EA |
| HW4601A22 | INPRO SEAL, 205 BRG, VBX | 1 EA |
| HW4600B36SP | V-RING SLINGER 1. 188 X 1. 690 X 0. 240 | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA |
| 05EP1100A01G | PUEP ENCL 205, BRG RET, GRSR, RLF, DRAIN FIT | 1 EA |
| HW4601A22 | INPRO SEAL, 205 BRG, VBX | 1 EA |
| HW4600B36SP | V-RING SLINGER 1. 188 X 1. 690 X 0. 240 | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| HA3100A37 | THRUBOLT 10-32 X 8. 500 | 4 EA |
| XY1032A02 | 10-32 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 35FH1000A19G | 35FH1000A19 W/GRAY FLUIDIZ | 1 EA |
| 10XN2520A16 | 1/4-20 X 1 HEX HEAD CAP SCR, ZINC PLATED | 3 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 3 EA |
| WD4100A03 | DE-750 HEYCO PLUG 62MP0750 MICRO PLASTIC | 1 EA |
| 06CB1503A01G | LIPPED CONDUIT BOX LID, MACH GRAY EPOXY | 1 EA |
| 06GS1009 | GASKET, KOBX LID, 1/8' THICK BLACK NEOPR | 1 EA |
| 10XN2520A12 | O1/4-20X 3/4 HEX HEAD CAP | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 2 EA |
| MJ5004A59 | ADHESIVE LOCTITE #401 SURFACE INSENSITIV | 0. 01 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8' DIA SHAFT | 1 EA |
| MJ5001A01 | 46-665 RED SEALER | 0. 001 QT |
| MJ1000A73 | INPRO P-80 ASSEMBLY LUB. / 1 QT. CONTAINE | 0. 001 QT |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 4 EA |
| LB1002 | LABEL, MARINE DUTY (ON ROLLS) | 1 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| LT0019A00 | MOTOR NO-LOAD PERFORMANCE DATA SHEET | 1 EA |
| WD1000D21 | TRM, T&B #B71M, RING, 18-14, . 25, NON-INSL | 3 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| MG1025N19 | PAINT, 778. 50 WILKO, RELIANCE ELEC GREEN | 0. 022 GA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| LB1449 | DIV-2/NEC WARNING LABEL | 1 EA |
| NP2162E | SS IEEE841 DIV-2 UL CSA-C US EEV PREM | 1 EA |
| NP2113E | SS IEEE841 AUX DATA INFORMATION SURFACE | 1 EA |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA |
SKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read more
#24832
Brand
Baldor
Model
ECP83587T-4
#24833
Brand
Baldor
Model
ECP83587T-5
#1310275
Brand
WEG
Model
00218ST3QIE145T-W22
| Brand | Bunting Bearings |
| Model | BJ4S091308 |
SKU: 24486
Happy customer
Our customer only wanted to purchase this particular motors. I was pleased once again to not only find them in stock, but at the cheapest cost to resale.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/