MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
EM31157 2HP, 1750RPM, 3PH, 60HZ, 56H, 3530M, ODP, F1, N
MODEL EM31157
Contact supplier for technical support on: 323 724 6771
$783.35 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
B
Duty Rating
CONT
Enclosure
ODP
Frame
56H
Frame Material
Steel
HP
2
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
45
Mounting Arrangement
F1
Number of Poles
4
Overall Length
11.75 in
Phase
3
Power Factor
77
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
230/460
| Enclosure | ODP |
| Frame | 56H |
| Frame Material | Steel |
| Frequency | 60 Hz |
| Output @ Frequency | 2.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 6.000 A @ 230.0 V 6.000 A @ 208.0 V 3.000 A @ 460.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 86.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | No Feedback |
| High Voltage Full Load Amps | 3.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Ready |
| KVA Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3530M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 12.63 IN |
| Power Factor | 71 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1750 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
SKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read more
#1752936
Brand
Baldor
Model
VEM3615T
#2853129
Brand
WEG
Model
00218OT3E56-S
#1311887
Brand
WEG
Model
00518EP3ERSR184TC
| Brand | NTN Bearing |
| Model | SUCPPL206C0FG1 |
| Brand | Cleveland |
| Model | C52777 |
| Brand | Grundfos |
| Model | 96465626 |
| Brand | Bell & Gossett |
| Model | 101218LF |
| Brand | Dodge |
| Model | 009013 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-329130 |
| Brand | SKF Bearing |
| Model | 640300 |
SKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/