Image for Illustration purposes only. Actual product may vary
EM3611T-5 3HP, 1760RPM, 3PH, 60HZ, 182T, 3631M, TEFC, F1
MODEL EM3611T-5
Contact supplier for technical support on: 323 724 6771
$934.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
B
Duty Rating
CONT
Enclosure
TEFC
Frame
182T
Frame Material
Steel
HP
3
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
73
Mounting Arrangement
F1
Number of Poles
4
Overall Length
16.55 in
Phase
3
Power Factor
75
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
1.125IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
575
| Output | 3 |
|---|---|
| RPM | 1760 |
| Pallet Quantity | 20 |
| Specification Number | 36G271S582G1 |
| Frame | 182T |
| Weight | 73. 000 LB |
| Multiplier | LS |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 575 |
| Poles | 04 |
| Class | STOCK |
| Type | 3631M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | B |
|---|---|
| Status | PRD/A |
| Change # | 783710 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3631M |
| Elec. Spec | 36WGS582 |
| CD Diagram | CD0006 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 36G271 |
| Layout | 36LYG271 |
| Frame | 182T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 6/29/2011 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/4/2013 |
| Leads | 3#16 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for EM3611T-5
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 36G271S582G1 | BALDOR/FT SMITH/REC WHSE #5 | 7/1/2011 | 31M 4P TEFC HOR 182T SUPER E | |
| 36G271Y438 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 28M 4P TEFC HOR 182T SUPER-E | |
| 36G271Y438 | BALDOR/FT SMITH/REC WHSE #5 | 6/9/1999 | 28M 4P TEFC HOR 182T SUPER-E |
| Nameplate No. | NP1259L |
|---|---|
| CAT. NO. | EM3611T-5 |
| SPEC. | 36G271S582G1 |
| HP | 3 |
| VOLTS | 575 |
| AMP | 3. 3 |
| RPM | 1760 |
| FRAME | 182T |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | K |
| DES | B |
| CL | F |
| NEMA-NOM-EFF | 89. 5 |
| PF | 75 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| USABLE AT 208V | |
| DE | 6206 |
| ODE | 6205 |
| ENCL | TEFC |
| SN | |
General Characteristics
| Full Load Torque | 8. 88 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 1. 9 Amps |
| Break-Down Torque | 33. 9 LB-FT |
| Line-line Res. @ 25°C. | 6 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 19. 5 LB-FT |
| Temp. Rise @ Rated Load | 40°C |
| Locked-Rotor Torque | 23 LB-FT |
| Temp. Rise @ S. F. Load | 48°C |
| Starting Current | 25. 9 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 33 | 54 | 67 | 75 | 79 | 82 | 77 |
| Efficiency | 80. 5 | 87. 7 | 89. 5 | 89. 5 | 88. 9 | 87. 6 | 89. 1 |
| Speed (RPM) | 1791 | 1782 | 1772 | 1762 | 1750 | 1738 | 1755 |
| Line Amperes | 2. 03 | 2. 34 | 2. 77 | 3. 34 | 3. 97 | 4. 66 | 3. 72 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA226380 | SA 36G271S582G1 | 1 EA |
| RA213478 | RA 36G271S582G1 | 1 EA |
| 36FN3000C01SP | EXFN, PLASTIC, 5. 25 OD, . 912 ID | 1 EA |
| S/P107-000-001 | SUPER E PROC'S-FS & WS PLTS-POLYREX EM G | 1 EA |
| 36CB3004 | 36 CB CASTING W/1. 09 DIA LEAD HOLE @ 6: 0 | 1 EA |
| 36GS1000SP | GASKET-CONDUIT BOX, . 06 THICK #SV-330 LE | 1 EA |
| 51XB1016A08 | 10-16X 1/2HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| 36EP3104A01 | FREP MACH W/GRSR, RAISED FH PADS | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA |
| 36EP3100A01SP | PU ENDPLATE, MACH | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA |
| 36FH4009A102SP | IEC FH GREASER W/AUTOPHERETIC PRIMER | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 36CB4516 | 36 LIPPED CB LID | 1 EA |
| 37GS1001SP | GASKET, CONDUIT BOX LID, . 06 THICK LEXID | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501E16 | 3KEY, 1/4 SQ X 1. 750 | 1 EA |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| HA3101A25 | THRUBOLT 1/4-20 X 11. 000 OHIO ROD | 4 EA |
| MG1000Y03 | WILKO 689. 710 GOLD PAINT SUPER E | 0. 022 GA |
| LC0006 | CONNECTION LABEL | 1 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| NP1259L | ALUM SUPER-E UL CSA-EEV CC NEMA PREMIUM | 1 EA |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 36-3301 | C FACE KIT | A8 |
| 36EP1304A62SP | FLANGE MTD ENDPLATE 182-4TD -ENCL (LESS | A8 |
SKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 701306
Works great
Fast service product works as described I am nothing but happy at this point
Read moreSKU: 23169
Olha saves the day.. again.
I needed a great big motor, in a great big hurry, at a fair price, and Olha came through again. When I'm in the field, I do not have time to muck-around shopping for what I need - hoping that I get the part. It's imperative that I KNOW the part is coming. Prompt communications, and follow-up, is critical to my business, and Olha delivers.
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read moreBrand
Baldor
Model
EM3611
Brand
Baldor
Model
EM3611T-57
Brand
Baldor
Model
EM3611T-G
Brand
Baldor
Model
EM3611T-BG
Brand
Baldor
Model
EM3611T
Brand
Leeson
Model
122252.00
| Brand | Regal Cutting Tools |
| Model | 015933AW |
| Brand | Deublin |
| Model | 157-045-120 |
| Brand | Gates Rubber |
| Model | 1922V806 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-305113 |
| Brand | NSK Bearings |
| Model | R2AZZ |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-855145 |
| Brand | Bando |
| Model | 815L6 |
| Brand | Irwin Tools |
| Model | 1835092 |
SKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 701306
Works great
Fast service product works as described I am nothing but happy at this point
Read moreSKU: 23169
Olha saves the day.. again.
I needed a great big motor, in a great big hurry, at a fair price, and Olha came through again. When I'm in the field, I do not have time to muck-around shopping for what I need - hoping that I get the part. It's imperative that I KNOW the part is coming. Prompt communications, and follow-up, is critical to my business, and Olha delivers.
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/