Image for Illustration purposes only. Actual product may vary
L1319-50 1.5HP, 1425RPM, 1PH, 50HZ, 56, 3528L, OPEN, F1
MODEL L1319-50
Contact supplier for technical support on: 323 724 6771
$962.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Duty Rating
CONT
Enclosure
OPEN
Frame
56
Frame Material
Steel
HP
1.5
Hz
50
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
41
Mounting Arrangement
F1
Number of Poles
4
Overall Length
14.32 in
Phase
1
Power Factor
98
Pulley Face Code
STANDARD
RPM
1425
Service Factor
1
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1500
Voltage
110/220
| Output | 1. 5 |
|---|---|
| RPM | 1425 |
| Pallet Quantity | 35 |
| Specification Number | 35D11-3534 |
| Frame | 56 |
| Weight | 41. 000 LB |
| Multiplier | K |
| Enclosure | OPEN |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 110/220 |
| Poles | 04 |
| Class | STOCK |
| Type | 3528L |
| Status | Active |
| Commodity Code | 8501. 40. 6040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | AG |
|---|---|
| Status | PRD/A |
| Change # | 780121 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3528L |
| Elec. Spec | 35WG3534 |
| CD Diagram | CD0001 |
| Enclosure | OPEN |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 35D011 |
| Layout | 35LYD011 |
| Frame | 56 |
| Mounting | F1 |
| Poles | 04 |
| Created Date | |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 1/23/2013 |
| Leads | 4#14 A PH, 2#18 B PH |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for L1319-50
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35D11-3534 | BALDOR/FT SMITH/REC WHSE #5 | 8/10/1999 | 28L 4P OPEN HOR 56 |
| Nameplate No. | NP1372L |
|---|---|
| CAT. NO. | L1319-50 |
| SPEC. | 35D11-3534 |
| HP | 1. 5 |
| VOLTS | 110/220 |
| AMP | 23/11. 5 |
| RPM | 1425 |
| FRAME | 56 |
| HZ | 50 |
| PH | 1 |
| SER. F. | 1. 15 |
| CODE | K |
| DES | L |
| CL | F |
| NEMA-NOM-EFF | 68 |
| PF | 74 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6205 |
| ODE | 6203 |
| ENCL | OPEN |
| SN | |
| IP23 |
General Characteristics
| Full Load Torque | 5. 5 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 12. 7 Amps |
| Break-Down Torque | 9. 5 LB-FT |
| Line-line Res. @ 25°C. | 0. 579 Ohms A Ph / 1. 61 Ohms B Ph |
| Pull-Up Torque | 9 LB-FT |
| Temp. Rise @ Rated Load | 79°C |
| Locked-Rotor Torque | 12. 5 LB-FT |
| Temp. Rise @ S. F. Load | |
| Starting Current | 84 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 39 | 56 | 69 | 78 | 84 | 87 | 0 |
| Efficiency | 50. 4 | 64 | 68. 1 | 68 | 64. 7 | 56. 2 | 0 |
| Speed (RPM) | 1483 | 1466 | 1446 | 1422 | 1388 | 1321 | 0 |
| Line Amperes | 13. 1 | 14. 2 | 16. 2 | 19. 2 | 23. 4 | 31. 1 | 0 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA025945 | SA 35J384-2444 | 1 EA |
| RA021995 | RA 35J384-2444 | 1 EA |
| EC1850A06SP | ELEC CAP 115V 2. 0 X 4. 3 X | 1 EA |
| TP5059 | GENERIC THERMAL KIT | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB3007 | 35 CB CASTING W/. 88 DIA. LEAD HOLE | 1 EA |
| 51XB1016A07 | 10-16 X 7/16 HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| 35EP3201A03 | STD FR EP OPEN-203BRG-35L OR M FRAME--LE | 1 EA |
| SP1006A01 | TERM. BOARD, MODE 35 SW X H-23655 | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 2 EA |
| NS2501A01 | INSULATOR, CAPACITOR | 1 EA |
| 51XB1016A05 | 10-16X5/16HX WA SL SR TYB (F/S) | 2 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3200A02 | STD PU ENDPLATE-OPEN-205 BRG | 1 EA |
| XY1032A02 | 10-32 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 35CB4521 | 35 LIPPED CB LID (GALV & PHOSPH) | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A04 | KEY RETAINER 0. 625 DIA SHAFTS | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| WD1000A15 | 3-520132-2 AMP FLAG (4M/RL NON-CANC/NON- | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 017 GA |
| 35CB4802A02SP | CAPACITOR COVER, STAMPED X W/AUTOPHORET | 1 EA |
| HA3100A18 | THRUBOLT 10-32 X 9. 250 | 4 EA |
| SP5055A67 | MODEL 35 TYPE L STATIONARY SWITCH | 1 EA |
| LB1087 | LABEL, MANUAL RESET (ROLL LABEL) | 1 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| NP1257L | ALUM UL CSA CC THERMAL REV MTG | 1 EA |
| LC0269 | 1PH, DV, REV, THERMAL, 7 LD, L. AMP THRU HTR H | 1 EA |
| 35PA1066 | PACKING GROUP COMBINED PRINT | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
Accesories
| Product Number | Description | Multiplier |
|---|---|---|
| 35-8764 | C FACE KIT | A8 |
| 35EP1604A01SP | D-FLANGE KIT | A8 |
SKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read moreSKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreBrand
Baldor
Model
L1319T
Brand
Baldor
Model
L1319-50
| Brand | Jason Industrial |
| Model | 5/5VX2000 |
| Brand | NoTrax |
| Model | 977R0036OK |
| Brand | CoxReels |
| Model | 1195-932-EAV3 |
| Brand | Lubriplate |
| Model | L0236-039 |
| Brand | Gates Rubber |
| Model | B47 |
| Brand | Thomas |
| Model | 921797 |
SKU: 27348
Baldor ga16 pedestal
As specified. Prompt delivery of two pedestals. No problems. Excellent in every regard.
Read moreSKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/