Image for Illustration purposes only. Actual product may vary
Baldor VEM31155 2HP 3450RPM 3PH 60HZ 56C 3428M OPEN F1 *Type 3428M*
MODEL VEM31155
Contact supplier for technical support on: 323 724 6771
$747.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
No Mounting
Conduit Box Material
Steel
Design Code
B
Duty Rating
CONT
Enclosure
OPEN
Frame
56C
Frame Material
Steel
HP
2
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
43
Mounting Arrangement
F1
Number of Poles
2
Overall Length
13.22 in
Phase
3
Power Factor
85
Pulley Face Code
C-FACE
RPM
3400 - 3600
Service Factor
1.15
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
3600
Voltage
230/460
| Output | 2 |
|---|---|
| RPM | 3450 |
| Pallet Quantity | 35 |
| Specification Number | 34F140-284 |
| Frame | 56C |
| Weight | 33. 000 LB |
| Multiplier | K |
| Enclosure | OPEN |
| Item Type | MOTOR |
| Manufacturing Plant | WESTVILLE |
| Voltage | 208-230/460 |
| Poles | 02 |
| Class | STOCK |
| Type | 3428M |
| Status | Active |
| Commodity Code | 8501. 52. 4000 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | S |
|---|---|
| Status | PRD/A |
| Change # | 706370 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3428M |
| Elec. Spec | 34WG0284 |
| CD Diagram | CD0005 |
| Enclosure | OPEN |
| Manufacturing Plant | WESTVILLE |
| Mech. Spec | 34F140 |
| Layout | 34LYF140 |
| Frame | 56C |
| Mounting | F1 |
| Poles | 02 |
| Created Date | |
| Base | N |
| Rotation | R |
| Insulation | B |
| Eff. Date | 8/19/2011 |
| Leads | 9#18 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for VM3155
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 34F140-284 | BALDOR/WESTVILLE | 8/10/1999 | 28M 2P OPEN VER 56C DRIPCOVER VM3155 |
| Nameplate No. | NP1256L |
|---|---|
| CAT. NO. | VM3155 |
| SPEC. | 34F140-284 |
| HP | 2 |
| VOLTS | 208-230/460 |
| AMP | 6. 2-5. 8/2. 9 |
| RPM | 3450 |
| FRAME | 56C |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | H |
| DES | B |
| CLASS | B |
| NEMA-NOM-EFF | 80 |
| PF | 80 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | 6. 2 |
| DE | 6203 |
| ODE | 6203 |
| ENCL | OPEN |
| SN | |
| SFA 6. 8-6. 4/3. 2 |
General Characteristics
| Full Load Torque | 3. 11 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 1. 35 Amps |
| Break-Down Torque | 12 LB-FT |
| Line-line Res. @ 25°C. | 7. 39 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 10. 6 LB-FT |
| Temp. Rise @ Rated Load | 85°C |
| Locked-Rotor Torque | 13. 4 LB-FT |
| Temp. Rise @ S. F. Load | 103°C |
| Starting Current | 20. 8 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 48 | 68 | 80 | 87 | 90 | 91 | 89 |
| Efficiency | 67. 7 | 77. 5 | 80. 1 | 80 | 78. 5 | 76 | 79. 1 |
| Speed (RPM) | 3547 | 3502 | 3447 | 3389 | 3324 | 3247 | 3350 |
| Line Amperes | 1. 47 | 1. 76 | 2. 21 | 2. 72 | 3. 34 | 4. 07 | 3. 09 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA197650 | SA 35B005P251H1 | 1 EA |
| RA185034 | RA 35B005P251H1 | 1 EA |
| S/P101-000-000 | EPACT PROCEDURES-FS PLANT-POLYREX EM, NO | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB3007 | 35 CB CASTING W/. 88 DIA. LEAD HOLE | 1 EA |
| 51XB1016A07 | 10-16 X 7/16 HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| 35EP3201A02 | FR ENDPLATE, MACH | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3400A14 | SPL FACE MTD END PLATE - OPEN-143-5TC-05 | 1 EA |
| 35AD2000 | AIR BAFFLE | 1 EA |
| 60XW0632A06 | 6-32 X 3/8 TORX HEAD SCREW TAPTITE II | 4 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| 35FH4006A04 | DRIP COVER SPECIAL, W/ AUTOPHERETIC PRIM | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 35CB4521 | 35 LIPPED CB LID (GALV & PHOSPH) | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8' DIA SHAFT | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| 35FN3002A05SP | EXFN, PLASTIC, 6. 376 OD, . 638 ID | 1 EA |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 017 GA |
| HA3100A15 | THRUBOLT 10-32 X 8. 375 | 4 EA |
| LC0005E01 | CONN. DIA. /WARNING LABEL (LC0005/LB1119) | 1 EA |
| LB1125C04 | STD-E (STOCK CTN LABEL STD-E WITH FLAG) | 1 EA |
| NP1256L | ALUM UL CSA CC | 1 EA |
| 35PA1066 | PACKING GROUP COMBINED PRINT | 1 EA |
| PK3082 | STYROFOAM CRADLE | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 25060
So fast
Every time I order one of these motors they come super fast. MRO is my go to motors
Read moreSKU: 26636
Baldor electric motors
Great motors...Always top quality. Will continue to purchase from MRO Supply.
Read moreSKU: 25590
Fast!
Exact match to the motor I needed. Best price anywhere, and super fast FREE shipping! Gained a new customer!
Read more| Brand | WorldWide Electric |
| Model | PEWWE60-12-404T MOD-BB-6316 |
| Brand | Airmaster |
| Model | 32181 |
| Brand | Smith Bearings |
| Model | CR-3-B |
SKU: 25590
2 hp motors
This order came in without any issues. The price on this order was very competitive.
Read moreSKU: 25060
So fast
Every time I order one of these motors they come super fast. MRO is my go to motors
Read moreSKU: 26636
Baldor electric motors
Great motors...Always top quality. Will continue to purchase from MRO Supply.
Read moreSKU: 25590
Fast!
Exact match to the motor I needed. Best price anywhere, and super fast FREE shipping! Gained a new customer!
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/