We never sell your data to third parties
Marathon U534B Globetrotter series 150 HP, 3600 RPM three-phase general purpose motor with NEMA 405TS frame and Drip Proof (DP) enclosure. Operates on 460V at 60 Hz with 1.15 service factor. Designed for continuous duty in industrial applications requiring open drip-proof ventilation.
MODEL 405TSTDCD14306
Contact supplier for technical support on: 715-675-8090
$17,054.38 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient temperature (°C)
50
Assembly/box mounting
F1/F2 CAPABLE
CE
Y
Country of Origin
Mexico
CSA
Y
Current
165 & 168 A
Design code
B
Drive end bearing
Ball
Drive end bearing size
6314
Duty
Continuous
Efficiency
93.6 & 92.7 %
Electrical type
Squirrel cage induction run
Enclosure
Drip proof
Frame
405TS
Frame Material
Cast iron
Frequency
60 & 50 Hz
Insulation class
F
IP code
23
KVA code
G
Motor orientation
Horizontal
Mounting
Rigid base
Number of speeds
1
Opp drive end bearing
Ball
Opp drive end bearing size
6314
Output HP
150 & 125 Hp
Output KW
112.0 & 93.0 kW
Packaged height
30.00 IN
Packaged length
40.00 IN
Packaged width
35.00 IN
Phase
3
Poles
2
Power factor
90.7
Resistance main
.064 Ohms
Rotation
Reversible
Service factor
1.15 & 1.15
Shaft diameter
2.125 in
Shaft type
TS
Speed
3570 & 2968 rpm
Starting method
Part Wdg Start & Wye Start Delta Run
Thermal protection
No protection
UL
Listed
Voltage
460 & 380 V
- IP22, NEMA EPACT Efficiency, Fire Pump motors are not recommended for use with variable frequency drives.
- NEMA design B, code G or less, 230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
- Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
- Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
- Class F Insulation, 50C Max Ambient, 1.15 service factor (except as noted)
- Red paint on 25 HP through 250 HP
- Ball bearings
- Will accept C-Face kits (except as noted), see accessories section for kits
- UL file EX5190, CSA file LR2025 and CE mark
- Will become build-up item when current stock is gone
SKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreSKU: 2270509
Marathon electric motor
motor started and ran as it should have .Very pleased with it ,also MRO supply Fast shipping.Recieved the very nrxt day
Read more
| Brand | Linn Gear |
| Model | 40FB11X.750SS |
SKU: 2303511
Marathon y543 shipping
The purchase from MRO went smoothly, and it arrived. However, the shipping department needs some remedial training. The box containing the motor was not strapped to the pallet, just set on top of it. As a result, the box rolled off the pallet and was split open. The freight company managed to wrap it up (upside down) with stretch film and put it back on the pallet, but it looked terrible. By a stroke of good fortune the motor was not damaged by this treatment and it looks OK. I can supply photos on request.
Read moreSKU: 2270509
Marathon electric motor
motor started and ran as it should have .Very pleased with it ,also MRO supply Fast shipping.Recieved the very nrxt day
Read more