Image for Illustration purposes only. Actual product may vary
KNM3457/35 .33HP, 3450RPM, 3PH, 60HZ, 56C, 3513M, TENV, F1
MODEL KNM3457/35
Contact supplier for technical support on: 323 724 6771
$640.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
No Mounting
Conduit Box Material
Steel
Design Code
B
Duty Rating
CONT
Enclosure
TENV
Frame
56C
Frame Material
Steel
HP
0.33
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
29
Mounting Arrangement
F1
Number of Poles
2
Overall Length
11.07 in
Phase
3
Power Factor
80
Pulley Face Code
C-FACE
RPM
3400 - 3600
Service Factor
1.35
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
3600
Voltage
230/460
| Output | . 33 |
|---|---|
| RPM | 3450 |
| Pallet Quantity | 0 |
| Specification Number | 35E010T750G2 |
| Frame | 56C |
| Weight | 33. 000 LB |
| Multiplier | K |
| Enclosure | TENV |
| Item Type | MOTOR |
| Manufacturing Plant | WESTVILLE |
| Voltage | 230/460 |
| Poles | 02 |
| Class | STOCK |
| Type | 3513M |
| Status | Active |
| Commodity Code | 8501. 51. 4040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | F |
|---|---|
| Status | PRD/A |
| Change # | 703597 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3513M |
| Elec. Spec | 35WGT750 |
| CD Diagram | CD0005 |
| Enclosure | TENV |
| Manufacturing Plant | WESTVILLE |
| Mech. Spec | 35E010 |
| Layout | 35LYE010 |
| Frame | 56C |
| Mounting | F1 |
| Poles | 02 |
| Created Date | 1/8/2008 |
| Base | N |
| Rotation | R |
| Insulation | F |
| Eff. Date | 7/19/2011 |
| Leads | 9#18 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for KNM3457/35
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35E010T750G2 | BALDOR/WESTVILLE | 1/14/2008 | 13M 2P TENV VER 56C |
| Nameplate No. | NP1256L |
|---|---|
| CAT. NO. | KNM3457/35 |
| SPEC. | 35E010T750G2 |
| HP | . 33 |
| VOLTS | 230/460 |
| AMP | 1/. 5 |
| RPM | 3450 |
| FRAME | 56C |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 35 |
| CODE | M |
| DES | B |
| CLASS | F |
| NEMA-NOM-EFF | 78. 5 |
| PF | 80 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | 1. 2 |
| DE | 6205 |
| ODE | 6203 |
| ENCL | TENV |
| SN | |
| SFA 1. 4/. 7 |
General Characteristics
| Full Load Torque | 0. 5 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 0. 3 Amps |
| Break-Down Torque | 2. 3 LB-FT |
| Line-line Res. @ 25°C. | 47. 9 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 1. 8 LB-FT |
| Temp. Rise @ Rated Load | 73°C |
| Locked-Rotor Torque | 1. 5 LB-FT |
| Temp. Rise @ S. F. Load | 96°C |
| Starting Current | 4. 2 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 47 | 71 | 70 | 74 | 87 | 88 | 87 |
| Efficiency | 49. 8 | 56. 7 | 73. 6 | 78. 5 | 71 | 72. 7 | 71. 7 |
| Speed (RPM) | 3561 | 3542 | 3523 | 3502 | 3480 | 3457 | 3471 |
| Line Amperes | 0. 34 | 0. 39 | 0. 46 | 0. 54 | 0. 63 | 0. 72 | 0. 666 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA166776 | SA 35E010T750G2 | 1 EA |
| RA155138 | RA 35E010T750G2 | 1 EA |
| S/P111-000-002 | CORONA TEST, SUPER E MOTORS - FT. SMITH | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB3007 | 35 CB CASTING W/. 88 DIA. LEAD HOLE | 1 EA |
| 36GS1000SP | GASKET-CONDUIT BOX, . 06 THICK #SV-330 LE | 1 EA |
| 51XB1016A07 | 10-16 X 7/16 HXWSSLD SERTYB | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| 35EP3100M69 | STD FR EP-TENV-35L OR M--203 BRG | 1 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3300A33 | SPL FACE MTD EP -ENCL-205 BRG | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| 35CB4521 | 35 LIPPED CB LID (GALV & PHOSPH) | 1 EA |
| 35GS1030 | 35 GS FOR CB LID - LEXIDE | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HA7000A04 | KEY RETAINER 0. 625 DIA SHAFTS | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 017 GA |
| HA3100A12 | THRUBOLT 10-32 X 7. 375 | 4 EA |
| LC0005E01 | CONN. DIA. /WARNING LABEL (LC0005/LB1119) | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| NP1256L | ALUM UL CSA CC | 1 EA |
| 35PA1066 | PACKING GROUP COMBINED PRINT | 1 EA |
| PK3082 | STYROFOAM CRADLE | 1 EA |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read more| Brand | Baldor |
| Model | P14G7704 |
| Brand | Drillco |
| Model | 720A507 |
| Brand | Ringfeder |
| Model | DKN 04 L=28 |
| Brand | Baldor |
| Model | VSSWDM3541 |
| Brand | Hubbell Wiring |
| Model | SFFLCSYOW |
| Brand | Drillco |
| Model | 720A036 |
| Brand | U.S.Tsubaki |
| Model | PBUS5-J-RH |
| Brand | Thomas |
| Model | 210985 |
SKU: 2833706
Replacement motor
I ordered this motor on Wednesday and received it on Thursday by truck, fantastic shipping and very good pricing.
Read moreSKU: 25992
Positive
I am a Purchasing Agent for a company with 30 plants. MRO is one of the best vendors out there. Use you all the time.
Read moreSKU: 25710
Exellent value, prizes
One of the best companies I have purchased equipment from. Low prices fast shipping. Best customer service.What else do I need.
Read moreSKU: 25344
Outstanding customer service & competetive pricing
The website is great and easy to navigate but when we run into $1000+ orders a simple phone call is available.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/