Image for Illustration purposes only. Actual product may vary
VUHM3542-5 .75HP, 1725RPM, 3PH, 60HZ, 56C, 3516M, TEFC, F3
MODEL VUHM3542-5
Contact supplier for technical support on: 323 724 6771
$519.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature
40 °C
Base Indicator
No Mounting
Conduit Box Material
Steel
Design Code
B
Duty Rating
CONT
Enclosure
TEFC
Frame
56C
Frame Material
Steel
HP
0.75
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
34
Mounting Arrangement
F3
Number of Poles
4
Overall Length
13.23 in
Phase
3
Power Factor
73
Pulley Face Code
C-FACE
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
575
| Output | . 75 |
|---|---|
| RPM | 1725 |
| Pallet Quantity | 0 |
| Specification Number | 35X042T499G1 |
| Frame | 56C |
| Weight | 35. 000 LB |
| Multiplier | K |
| Enclosure | TEFC |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 575 |
| Poles | 04 |
| Class | STOCK |
| Type | 3516M |
| Status | Active |
| Commodity Code | 8501. 51. 4040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | G |
|---|---|
| Status | PRD/A |
| Change # | 778753 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3516M |
| Elec. Spec | 35WGT499 |
| CD Diagram | CD0006 |
| Enclosure | TEFC |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 35X042 |
| Layout | 35LYX042 |
| Frame | 56C |
| Mounting | F3 |
| Poles | 04 |
| Created Date | 5/22/2008 |
| Base | N |
| Rotation | R |
| Insulation | F |
| Eff. Date | 1/22/2013 |
| Leads | 3#18 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for VUHM3542-5
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35X042T499G1 | BALDOR/FT SMITH/REC WHSE #5 | 5/27/2008 | 16M 4P TEFC VER 56C | |
| 35X042R068H1 | BALDOR/FT SMITH/REC WHSE #5 | 11/27/2007 | 18M 4P TEFC VER 56C |
| Nameplate No. | NP1372L |
|---|---|
| CAT. NO. | VUHM3542-5 |
| SPEC. | 35X042T499G1 |
| HP | . 75 |
| VOLTS | 575 |
| AMP | . 9 |
| RPM | 1725 |
| FRAME | 56C |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | H |
| DES | B |
| CL | F |
| NEMA-NOM-EFF | 75. 5 |
| PF | 78 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6205 |
| ODE | 6203 |
| ENCL | TEFC |
| SN | |
| IP44 |
General Characteristics
| Full Load Torque | 2. 3 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 0. 6 Amps |
| Break-Down Torque | 7. 95 LB-FT |
| Line-line Res. @ 25°C. | 44. 6 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 5. 46 LB-FT |
| Temp. Rise @ Rated Load | 35°C |
| Locked-Rotor Torque | 5. 95 LB-FT |
| Temp. Rise @ S. F. Load | 40°C |
| Starting Current | 6. 3 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 39 | 57 | 71 | 79 | 84 | 87 | 82 |
| Efficiency | 60 | 72. 8 | 77. 4 | 78. 9 | 79 | 78 | 79 |
| Speed (RPM) | 1785 | 1773 | 1760 | 1746 | 1730 | 1712 | 1736 |
| Line Amperes | 0. 624 | 0. 696 | 0. 793 | 0. 92 | 1. 07 | 1. 24 | 1. 01 |
Parts for current product
| Product Number | Description | Quantity |
|---|---|---|
| SA250105 | SA 35X042P670G1 | 1 EA |
| RA236965 | RA 35X042P670G1 | 1 EA |
| 35FN3002A05SP | EXFN, PLASTIC, 6. 376 OD, . 638 ID | 1 EA |
| S/P111-000-002 | CORONA TEST, SUPER E MOTORS - FT. SMITH | 1 EA |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA |
| 35CB4007 | KOBX, AUTOPHORETIC (REL# 79097-49-C) | 1 EA |
| 35GS3009 | GASKET, KOBX 35CB4006 (411881-15A) | 1 EA |
| WD4101A13 | STEEL CAPLUG, BP-1 1/8, PLUG D3561S | 1 EA |
| 51XB1016A05 | 10-16X5/16HX WA SL SR TYB (F/S) | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 35EP3100M02 | FREP TEFC 203 BRG W/O GRSR (RAISED FH MT | 1 EA |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA |
| 35EP3300A33 | SPL FACE MTD EP -ENCL-205 BRG | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| 35FH4005A32SP | IEC FH NO GRSR W/3 HOLES - W/AUTOPHERETI | 1 EA |
| 51XW1032A06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD S | 3 EA |
| 35CB4519 | CB LID RAW & UNPRIMED, REL# 79097-50-B | 1 EA |
| 35GS3019 | GASKET, FOR KOBX LID 35CB4519 | 1 EA |
| 51XW0832A07 | 8-32 X. 44, TAPTITE II, HEX WSHR SLTD SE | 4 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A04 | KEY RETAINER 0. 625 DIA SHAFTS | 1 EA |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 2 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| MG1000N49 | PAINT, 678. 50 WILKO, REL GRN (55 GA) | 0. 017 GA |
| HA3100A15 | THRUBOLT 10-32 X 8. 375 | 4 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA |
| LC0005 | CONN. DIA., TY M, 9-LD, DUAL VOLT, REVERSING | 1 EA |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA |
| NP1372L | ALUM UL CSA CE CC | 1 EA |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA |
| PK3082 | STYROFOAM CRADLE | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read moreSKU: 25992
Vem3546
It was harder to find this motor than I expected. MRO Supply had the best price of the 5 vendors I looked at.
Read moreBrand
Baldor
Model
VUHM3542-5
Brand
Baldor
Model
VUHM3542
SKU: 24596
Great service
Flawless from start to finish. Got my motor at the best price and delivered on time. I will definitely use this company again.
Read moreSKU: 26018
Great service!
We were really in a bind and MROSUPPLY had the product in stock for the best price and managed to get it out the same day!
Read moreSKU: 25992
Vem3546
It was harder to find this motor than I expected. MRO Supply had the best price of the 5 vendors I looked at.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/