MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
EHM2539T 40HP, 1770RPM, 3PH, 60HZ, 324T, 4064M, OPSB, F1
MODEL EHM2539T
Contact supplier for technical support on: 323 724 6771
$5,347.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
A
Duty Rating
CONT
Enclosure
OPSB
Frame
324T
Frame Material
Steel
HP
40
Hz
60
Insulation Class
F
Inverter Code
Inverter Ready
Motor Standards
NEMA
Motor Weight
433
Mounting Arrangement
F1
Number of Poles
4
Overall Length
27.19 in
Phase
3
Power Factor
82
Pulley Face Code
STANDARD
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
2.125IN
Shaft Ground Indicator
Mounting Provisions Only
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
230/460
| Output | 40 |
|---|---|
| RPM | 1775 |
| Pallet Quantity | 0 |
| Specification Number | 42H068W595G1 |
| Frame | 324T |
| Weight | 433. 000 LB |
| Multiplier | LS |
| Enclosure | OPSB |
| Item Type | MOTOR |
| Manufacturing Plant | COLUMBUS |
| Voltage | 230/460 |
| Poles | 04 |
| Class | STOCK |
| Type | 4250M |
| Status | Active |
| Commodity Code | 8501. 52. 8040 |
| Origin | US |
| Revision | L |
|---|---|
| Status | PRD/A |
| Change # | 783708 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 4250M |
| Elec. Spec | 42WGW595 |
| CD Diagram | CD0005 |
| Enclosure | OPSB |
| Manufacturing Plant | COLUMBUS |
| Mech. Spec | 42H068 |
| Layout | 42LYH068 |
| Frame | 324T |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 6/22/2006 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/1/2013 |
| Leads | 9#8 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for EHM2539T
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 42H068W595G1 | BALDOR/COLUMBUS | 1/7/2011 | 50M 4P OPSB HOR 324T SE | |
| 42H068W595G1 | BALDOR/OZARK | 1/7/2011 | 50M 4P OPSB HOR 324T SE |
| Nameplate No. | NP2094E06B03 |
|---|---|
| CAT. NO. | EHM2539T |
| SPEC. | 42H068W595G1 |
| HP | 40 |
| VOLTS | 230/460 |
| AMPS | 92/46 |
| RPM | 1775 |
| FRAME | 324T |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 15 |
| CODE | G |
| DES | B |
| CL | F |
| NEMA-NOM-EFF | 94. 5 |
| PF | 86 |
| RATING | 40C AMB-CONT |
| CC | 010A |
| USABLE AT 208V | 97. 5 |
| DE | 6312 |
| ODE | 6311 |
| AUTO | |
| MANUAL | |
| NONE | |
| ENCL | OPSB |
| SN | |
| BLANK |
General Characteristics
| Full Load Torque | 118 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 16. 5 Amps |
| Break-Down Torque | 360 LB-FT |
| Line-line Res. @ 25°C. | 0. 159 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 136 LB-FT |
| Temp. Rise @ Rated Load | 30°C |
| Locked-Rotor Torque | 197 LB-FT |
| Temp. Rise @ S. F. Load | 39°C |
| Starting Current | 302 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 47 | 69 | 79 | 85 | 85 | 86 | 85 |
| Efficiency | 91 | 94. 2 | 94. 8 | 94. 6 | 94. 2 | 93. 5 | 94. 4 |
| Speed (RPM) | 1793 | 1787 | 1781 | 1775 | 1768 | 1760 | 1771 |
| Line Amperes | 22 | 28. 9 | 37. 5 | 46. 3 | 57. 8 | 69. 2 | 53. 2 |
Parts for current product
| Product Number | Description | Quantity | |
|---|---|---|---|
| SA144787 | SA 42H068W595G1 | 1 EA | |
| RA133967 | RA 42H068W595G1 | 1 EA | |
| S/P107-000-004 | SUPER-E(284 FR. & UP)-CL PLANT, POLYREX E | 1 EA | |
| HA6360 | LIFTING LUG FOR 42 FRAME MOTORS. | 2 EA | |
| 42CB4000A01 | CONDUIT BOX 40, STAMPED | 1 EA | |
| 19XW2520A08 | SCREW, 1/4-20X1/2 TAPTITE-II OR ROLOC 91 | 2 EA | |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 2 EA | |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 1 EA | |
| 42EP3200A01 | FR ENDPLATE, MACH 324-6T | 1 EA | |
| HW5100A13 | W4627-047 WVY WSHER | 1 EA | |
| 42EP3200B13 | PUEP, MACH FOR 1/2 SH GND MTG | 1 EA | |
| XY5013A12 | NUT, 1/2-13, HEX, STEEL, ZINCPLATED | 8 EA | |
| 42CB4500A01 | CONDUIT BOX LID 42, STAMPED, AUTOPHORETI | 1 EA | |
| 51XF2520A08 | SCREW, HEX SER SLT HD, ZN 1/4-20 X. 50 L | 2 EA | |
| HW2501H33 | KEY, 1/2 SQ X 3. 875 | 1 EA | |
| 84XN0540J08 | 5-40 X 1/2' SHCS, BLACK OXIDE | 2 EA | |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA | |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 2 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 03 LB | |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 2 EA | |
| MG1000G27 | PAINT- S9282E CHARCOAL GREY | 0. 08 GA | |
| HA3151A02 | THRUBOLT STUD 1/2-13 X 19. 25 | 4 EA | |
| 42AD2001A01 | BAFFLE PLATE 42 OPEN, SLOTTED BAND MTRS | 1 EA | |
| 42AD2001A01 | BAFFLE PLATE 42 OPEN, SLOTTED BAND MTRS | 1 EA | |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 4 EA | |
| LC0005 | CONN. DIA., TY M, 9-LD, DUAL VOLT, REVERSING | 1 EA | |
| NP2094E06B03 | NP LABEL W/BARCODE (PREM EFF HVAC MTR) | 1 EA | |
| 40PA1000 | PACKAGING GROUP | 1 EA | |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
SKU: 701029
Quality, fast shipping
This is a very professional supply company. They have excellent prices, fast deliveries and parts that you will not find any where else. i am glad I found them when I purchased a Baldor Motor, now I just purchased the cap.
Read moreSKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read more
#23360
Brand
Baldor
Model
EM2539T
#5057135
Brand
Marathon Electric
Model
GT0073
#23359
Brand
Baldor
Model
EFM2539T
#699438
Brand
Baldor
Model
EM2539T-G
#2548717
Brand
Baldor
Model
EM2539T-BG
#699849
Brand
Baldor
Model
EHFM2539T
| Brand | Jason Industrial |
| Model | 65.5M063 |
| Brand | AMI Bearings |
| Model | UCMF211-32MZ2 |
| Brand | AMI Bearings |
| Model | UENST206-18 |
| Brand | Irwin Tools |
| Model | 4935099 |
| Brand | AMI Bearings |
| Model | UCMTB205-16MZ20 |
| Brand | Hubbell Wiring |
| Model | SNAP2162RSC |
| Brand | AMI Bearings |
| Model | UCMF207-20MZ20RF |
| Brand | AMI Bearings |
| Model | UCMF207MZ2RF |
SKU: 701029
Quality, fast shipping
This is a very professional supply company. They have excellent prices, fast deliveries and parts that you will not find any where else. i am glad I found them when I purchased a Baldor Motor, now I just purchased the cap.
Read moreSKU: 2840530
Baldor erm3108
This motor is a little bit, maybe a half inch longer than the one I took off. But we were able to use the cradle that it came on.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/