MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
CSSWDM3538-5 .5HP, 1755RPM, 3PH, 60HZ, 56C, 3513M, TENV, F1
MODEL CSSWDM3538-5
Contact supplier for technical support on: 323 724 6771
$1,645.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Ambient Temperature
40 °C
Base Indicator
Rigid
Conduit Box Material
Steel
Design Code
B
Duty Rating
CONT
Enclosure
TENV
Frame
56C
Frame Material
Stainless Steel
HP
0.5
Hz
60
Insulation Class
F
Inverter Code
Not Inverter
Motor Standards
NEMA
Motor Weight
37
Mounting Arrangement
F1
Number of Poles
4
Overall Length
11.09 in
Phase
3
Power Factor
62
Pulley Face Code
C-FACE
RPM
1700 - 1800
Service Factor
1.25
Shaft Diameter
0.625IN
Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Reversible
Speed Code
Single Speed
Synchronous RPM
1800
Voltage
575
| Output | . 5 |
|---|---|
| RPM | 1755 |
| Pallet Quantity | 0 |
| Specification Number | 35V814M808G1 |
| Frame | 56C |
| Weight | 37. 000 LB |
| Multiplier | WD |
| Enclosure | TENV |
| Item Type | MOTOR |
| Manufacturing Plant | FT SMITH |
| Voltage | 575 |
| Poles | 04 |
| Class | STOCK |
| Type | 3513M |
| Status | Active |
| Commodity Code | 8501. 51. 4040 |
| Origin | US |
| Explosion Proof Class/Group | NONE |
| Revision | C |
|---|---|
| Status | PRD/A |
| Change # | 754584 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 3513M |
| Elec. Spec | 35WGM808 |
| CD Diagram | CD0006 |
| Enclosure | TENV |
| Manufacturing Plant | FT SMITH |
| Mech. Spec | 35V814 |
| Layout | 35LYV814 |
| Frame | 56C |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 6/22/2010 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 7/9/2012 |
| Leads | 3#18 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for CSSWDM3538-5
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 35V814M808G1 | BALDOR/FT SMITH/REC WHSE #5 | 6/30/2010 | 13M 4P TENV HOR 56C S. P. #9-4 |
| Nameplate No. | NP1951A05 |
|---|---|
| CAT. NO. | CSSWDM3538-5 |
| SPEC. | 35V814M808G1 |
| HP | . 5 |
| VOLTS | 575 |
| AMP | . 7 |
| RPM | 1755 |
| FRAME | 56C |
| HZ | 60 |
| PH | 3 |
| SER. F. | 1. 25 |
| CODE | N |
| DES | B |
| CLASS | F |
| NEMA-NOM-EFF | 80 |
| PF | 64 |
| RATING | 40C AMB-CONT |
| CC | |
| USABLE AT 208V | |
| DE | 6205 |
| ODE | 6203 |
| ENCL | TENV |
| SN | |
| SFA. 8 |
General Characteristics
| Full Load Torque | 1. 47 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 0. 578 Amps |
| Break-Down Torque | 7. 83 LB-FT |
| Line-line Res. @ 25°C. | 52. 1 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 4. 53 LB-FT |
| Temp. Rise @ Rated Load | 71°C |
| Locked-Rotor Torque | 5. 3 LB-FT |
| Temp. Rise @ S. F. Load | 84°C |
| Starting Current | 6. 11 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 26 | 40 | 54 | 64 | 72 | 78 | 72 |
| Efficiency | 59. 1 | 73. 6 | 78. 8 | 80. 2 | 80. 7 | 80. 7 | 80. 7 |
| Speed (RPM) | 1791 | 1781 | 1770 | 1759 | 1747 | 1734 | 1747 |
| Line Amperes | 0. 581 | 0. 61 | 0. 658 | 0. 716 | 0. 793 | 0. 889 | 0. 793 |
Parts for current product
| Product Number | Description | Quantity | |
|---|---|---|---|
| SA199210 | SA 35V814M808G1 | 1 EA | |
| RA186548 | RA 35V814M808G1 | 1 EA | |
| NS2512A01 | INSULATOR, CONDUIT BOX X | 1 EA | |
| 35CB5001A08 | CONDUIT BOX KIT, S/P 9-2 (ALL STAINLESS) | 1 EA | |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA | |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA | |
| 35FE1913A01 | FR ENDPLATE ASSY | 1 EA | |
| HW5100A03SP | WAVY WASHER (W1543-017) | 1 EA | |
| 35PE1914A02 | PU EP ASSY. FOR LOCKED BRG | 1 EA | |
| HW4606A02 | JM CLIPPER/SEAL (LWE-0938-1624-AL23) | 1 EA | |
| 12XN1032S22 | 10-32 X 1 3/8 SLOT HEX, STAINLESS STEEL | 2 EA | |
| HA1049A01 | DUBO LOK WASHER SIZE 10 (NYLON LOCK SEAL | 2 EA | |
| HA1049A01 | DUBO LOK WASHER SIZE 10 (NYLON LOCK SEAL | 4 EA | |
| HW2502D13 | SS KEY, 3/16 SQ X 1. 375 | 1 EA | |
| HA7000A04 | KEY RETAINER 0. 625 DIA SHAFTS | 1 EA | |
| MJ5001A02 | 732 CL SEALANT 3 OZ DIXIE BEARING 289100 | 0. 001 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB | |
| HA3100S45 | THRU BOLT HEX-HEAD 7. 95 10-32 | 4 EA | |
| LB1125C01 | STD (STOCK) CARTON LABEL BALDOR WITH FLA | 1 EA | |
| PA1000 | PACKING GROUP 3500 SHORT | 1 EA |
#24752
Brand
Baldor
Model
CSSWDM3538
#702353
Brand
Baldor
Model
CSSWDM3538-5
| Brand | Balax |
| Model | 90976-000 |
| Brand | Hubbell Wiring |
| Model | BR106B |
| Brand | TB Woods |
| Model | 900XXH400 |
| Brand | Dixon |
| Model | 2920812CBC |
| Brand | Hubbell Wiring |
| Model | SFFSCSBEI |
| Brand | Dodge |
| Model | 142769 |
| Brand | Irwin Tools |
| Model | 92145ZR |
| Brand | Dodge |
| Model | PA05363-10 |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/