Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL2740SW LKG WT S/SHRD RCPT 30A 3P 600V L17-30R
MODEL HBL2740SW
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$155.71 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable: See conditions
Amperage
30A
Color
Gray
Voltage
3 Phase 600V AC
3P4W, 30A 3PH 600V, L17-30R, Gray Thermoplastic Polyester Housing
Specifications
| Product Type | |
|---|---|
| Product Item | Single Receptacle |
| Wiring Scheme | 3-Pole, 4-Wire Grounding |
| Amperage | 30A |
| Voltage | 3 Phase 600V AC |
| NEMA Configuration | L17-30R |
| Item Style | Shrouded Watertight |
| Device Color | Gray |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Impact modified PBT |
| Terminal Clamp Material | Steel, nickel plated.080" Curved, scalloped |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (Green) |
| Body Contact Carrier Material | Natural White Nylon |
| Contact Spring Material | .031" Brass |
| Spring Binding Plate Material | .031" Brass |
| Mounting Screw Material | Stainless Steel 302/304 Multi-drive |
| Ground Contact Material | .031" Brass |
| Rivet Material | Steel |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Terminal Accommodation | 30A #10 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | VO per UL94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | Type 4, 4X, 12, IP66 suitability |
| Flange Gasket Material | Closed-cell Neoprene foam |
| Lid Gasket Material | Closed-cell Neoprene foam |
| Cover Hinge Pin Material | Stainless Steel 302/304 |
| Housing and Flange Material | Gray Valox |
| Cover Spring Material | Stainless Steel 302/304 |
| Listings | FED SPEC UL/CSA |
| UPC Number | 783585231983 |
| Weight in LBs | 0.65 |
SKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreBrand
Hubbell Wiring
Model
HBL2820SW
Brand
Hubbell Wiring
Model
HBL2740SW
Brand
Hubbell Wiring
Model
HBL2830SW
Brand
Hubbell Wiring
Model
HBL2420SW
Brand
Hubbell Wiring
Model
HBL2730SW
| Brand | CoxReels |
| Model | 1680-2420-AB |
| Brand | U.S.Tsubaki |
| Model | Q1-2D |
| Brand | RAB Lighting |
| Model | CLED2X26NW/D10 |
| Brand | MRO Supply |
| Model | 45020004-02 |
| Brand | Orbit Industries |
| Model | RW-300/50 |
| Brand | Flowdrill |
| Model | 110590 |
| Brand | Taylor Pneumatic |
| Model | T-6758R |
| Brand | Harwal |
| Model | VS-75V |
SKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/