Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL2813BK LKG CONN 30A 3P 120/208V L21-30R B/W
MODEL HBL2813BK
This vendor has a minimum order quantity of 4. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$111.36 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 4
Typically Ships in: 1 day
Returnable: See conditions
Amperage
30A
Color
Black
Cord dia
35 in-1.15 in
Voltage
3 Phase Y 120/208V AC
4P5W, 30A 3PH 120/208V AC, L21-30R, Black Nylon
Specifications
| Product Type | |
|---|---|
| Product Item | Connector Body |
| Wiring Scheme | 4-Pole, 5-Wire Grounding |
| Amperage | 30A |
| Voltage | 3 Phase Y 120/208V AC |
| NEMA Configuration | L21-30R |
| Item Style | Insulgrip |
| Device Color | Black |
| Cord Dia. | .35"-1.15" (9-29) |
| Contact Nose Material | Black Nylon |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Black nylon |
| Cord Clamp Material | Black Nylon |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (green finish) Multi-drive |
| Cord Clamp Screw Material | Steel, zinc plated Multi-drive |
| Body Holding Screw Material | Steel, zinc plated Multi-drive |
| Body Contact Carrier Material | Natural White Nylon |
| Contact Spring Material | Brass |
| Spring Binding Plate Material | Brass |
| Ground Contact Material | .031" (.8) Brass |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
| Terminal Accommodation | 30A #10 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| Listings | FED SPEC UL/CSA |
| UPC Number | 783585172293 |
| Weight in LBs | 0.4 |
SKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreBrand
Hubbell Wiring
Model
HBL2810SW
Brand
Hubbell Wiring
Model
HBL2813BK
Brand
Hubbell Wiring
Model
HBL2810AR
Brand
Hubbell Wiring
Model
HBL2810SR
Brand
Hubbell Wiring
Model
HBL2810SR2
| Brand | StrongHold |
| Model | 56-364 |
| Brand | Magnetics |
| Model | IMPL2100 |
| Brand | Gates Rubber |
| Model | TP1510H200 |
| Brand | SEW Eurodrive |
| Model | R47/II2GD EDRN80M4/CICIID2/TF 01.7870253701.0003.2 |
| Brand | Hubbell Wiring |
| Model | HBL50AITSSB |
| Brand | Dixon |
| Model | HT8BF10 |
| Brand | Edwards |
| Model | TD180/.5X2.25 |
SKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/