MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL330P6W PS IEC PLUG 2P3W 30A 250V W/T
MODEL HBL330P6W
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$305.33 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Amperage
30A
Voltage
250V
Watertight IEC Pin and Sleeve Plug, 2P3W, 30A 250V
Specifications
| Product Type | |
|---|---|
| IEC Product Type | Watertight |
| Service Style | Standard |
| Device | Plug |
| Amperage | 30A |
| Voltage | 250V |
| Poles and Wires | 2 Pole, 3 Wire |
| Terminal Accommodations | #12 To #8 AWG copper wire only |
| Cord clamp range | .330" To.830" |
| Color | |
| Replacement Interior Number | IN330BM |
| Housing | Zytel 801 Nylon |
| Lock Ring | Rynite SST35 |
| Contact Carrier | High-Impact Thermoset |
| Retainer | High-Impact Thermoset |
| Ground/Phase Pins | Brass |
| Terminal Screws | Stainless Steel (300 series) |
| Assembly Screws | Stainless Steel (300 series) |
| Cord Clamps | Rynite SST35 |
| Grommet/Glands | Solid Neoprene |
| Gland Cap | Rynite SST35 |
| Cord Clamp Screws | Stainless Steel (300 Series) |
| Clamp Nut | Nickel Plated Brass |
| Certification | UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No.182.1, UL Classified to IEC60309-1, IEC |
| Dielectric Withstand Voltage | Withstands 3, 000V AC Min. |
| Max Working Voltage | 600V RMS (i. e. minimum creepage distance 10 mm minimum) |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Temperature Rise | Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%. |
| Endurance | 5, 000 connect and disconnect cycles with load for 16A and 20A, 1, 000 cycles with load and 1, 000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A. |
| Impact Resistance | Per CSA C22.2 No.182.1 / UL1682. |
| Cord Grip Retention | Per CSA C22.2 No.182.1 / UL1682. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49 and the harmonized European Standards. |
| Terminal Identification | Terminals identified in accordance with North American and IEC conventions. |
| Product Identification | Identification and ratings are a permanent part of the device housing. |
| Moisture Resistance | Watertight per IEC 60309-1 |
| Ingress Protection | IP 67 Suitability |
| Flammability | HB or Better per UL 94 or CSA C22.2 No.0.17 |
| Operating Temperatures | Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact. |
| Certifications | UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL 1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets and LR285C for Receptacle CSA Standard C22.2 No.182.2, UL Classified to IEC 309-1 and |
| Device Description | Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service. |
| UPC Number | 78358540358 |
| Weight in LBs | 1.4 |
SKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read more
#5019010
Brand
Hubbell Wiring
Model
HBLS330R6W
#1022119
Brand
Hubbell Wiring
Model
HBL330P6W
#5019004
Brand
Hubbell Wiring
Model
HBLS330C6W
#1022086
Brand
Hubbell Wiring
Model
HBL330B6W
| Brand | Dixon |
| Model | HA20T25F |
| Brand | SKF Seals |
| Model | 619912 |
| Brand | SKF Seals |
| Model | 619667 |
| Brand | SKF Seals |
| Model | 640150 |
| Brand | HubCity |
| Model | 0223-07627 |
| Brand | Link-Belt |
| Model | 10434897 |
| Brand | Dixon Sanitary Fittings |
| Model | BV2BV-05011-EA |
SKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/