MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL520P7W PS IEC PLUG 4P5W 20A 277/480V W/T
MODEL HBL520P7W
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$248.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: See conditions
Amperage
20A
Voltage
3 Phase Y 277/480V
Watertight IEC Pin and Sleeve Plug, 4P5W, 20A 3PH 277/480V
Specifications
| Product Type | |
|---|---|
| IEC Product Type | Watertight |
| Service Style | Standard |
| Device | Plug |
| Amperage | 20A |
| Voltage | 3 Phase Y 277/480V |
| Poles and Wires | 4 Pole, 5 Wire |
| Terminal Accommodations | #14 To #10 AWG copper wire only |
| Cord clamp range | .330" To.830" |
| Color | |
| Replacement Interior Number | IN520EM |
| Hinge Spring | Stainless Steel (300 series) |
| Housing | Zytel 801 Nylon |
| Lock Ring | Rynite SST35 |
| Contact Carrier | High-Impact Thermoset |
| Retainer | High-Impact Thermoset |
| Ground/Phase Pins | Brass |
| Terminal Screws | Stainless Steel (300 series) |
| Assembly Screws | Stainless Steel (300 series) |
| Gaskets | Neoprene |
| Cord Clamps | Rynite SST35 |
| Grommet/Glands | Solid Neoprene |
| Gland Cap | Rynite SST35 |
| Cord Clamp Screws | Stainless Steel (300 Series) |
| Clamp Nut | Nickel Plated Brass |
| Certification | UL Listed, CSA Certified |
| Dielectric Withstand Voltage | Withstands 3, 000V AC |
| Max Working Voltage | 600V AC RMS |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Short Circuit Withstand | Suitable for use on a circuit capable of delivering not more than 10, 000 RMS symmetrical amperes at the voltage rating of the receptacle. |
| Temperature Rise | Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%. |
| Endurance | Mechanical: 10, 000 cycles, Electrical: 6, 000 cycles. |
| Impact Resistance | In accordance with UL746C |
| Cord Grip Retention | Per CSA C22.2 No.182.1 / UL1682. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49 and the harmonized European Standards. |
| Terminal Identification | Terminals identified in accordance with North American and International conventions. |
| Product Identification | Identification and ratings are a part of the external label and molded into the receptacle mount. |
| Moisture Resistance | Watertight per IEC 60309-1 |
| Ingress Protection | IP67 Suitability |
| Flammability | UL94-5VA and V-0 classification. |
| Operating Temperatures | Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact. |
| UV Resistance | All materials are UV Stabilized. |
| Certifications | UL Listed, CSA Certified. |
| Device Description | Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service. |
| UPC Number | 78358540534 |
| Weight in LBs | 1.2 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read more
#1023651
Brand
Hubbell Wiring
Model
HBL520C7W
#1023644
Brand
Hubbell Wiring
Model
HBL520B7W
#1023666
Brand
Hubbell Wiring
Model
HBL520R7W
#1023660
Brand
Hubbell Wiring
Model
HBL520P7W
| Brand | Hubbell Wiring |
| Model | HRNS06501 |
| Brand | WEG |
| Model | 07518ET3E365TC-W22G |
| Brand | PIP |
| Model | 16-343LG/S |
| Brand | Timken Drives |
| Model | 11662 |
| Brand | Habasit America |
| Model | C1151K0165HTTA |
| Brand | Martin Sprocket |
| Model | TS1242 |
| Brand | Electra/Grove Gear |
| Model | GR8180165.00 |
| Brand | Baldor |
| Model | ECP3764T-4 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/