MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL560PS1W PS INS PLUG 4P5W 60A 600V S1
MODEL HBL560PS1W
Contact supplier for technical support on: jruvalcaba@hubbell.c
$424.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Amperage
60A
Voltage
250V DC/600V AC
Watertight Insulgrip Plug, 4P5W, 60A 600V, Series 1
Specifications
| Product Type | |
|---|---|
| Service Style | Standard |
| Insulgrip Grounding Style | Style I |
| Device | Plug |
| Amperage | 60A |
| Voltage | 250V DC/600V AC |
| Poles and Wires | 4 Pole, 5 Wire |
| Terminal Accommodations | #6 To #4 AWG copper wire only |
| Cord clamp range | 1.040" To 1.450" |
| Replacement Interior Number | IN560MS1 |
| Hinge Spring | Stainless Steel (300 series) |
| Housing | Valox 357 |
| Shroud | Aluminum |
| Lock Ring | Epoxy Painted Aluminum |
| Mounting Screws | Stainless Steel (300 Series) |
| Contact Carrier | Thermoset Polyester |
| Retainer | Thermoset Polyester |
| Terminal Screws | Heat treated and Zinc Plated Steel |
| Assembly Screws | Stainless Steel (300 series) |
| Gaskets | Neoprene |
| Cord Clamps | Rynite SST35 |
| Grommet/Glands | Neoprene |
| Gland Cap | Rynite SST35 |
| Cord Clamp Screws | Stainless Steel (300 Series) |
| Clamp Nut | Nickel Plated Brass |
| Ground/Phase Sleeve | Brass |
| Ground Standoff | Brass |
| Ground Bracket | Nickel Plated Spring Bronze |
| Certification | UL Listed, CSA Certified |
| Dielectric Withstand Voltage | Withstands 3, 000V AC |
| Max Working Voltage | 600V AC RMS |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Short Circuit Withstand | Suitable for use on a circuit capable of delivering not more than 10, 000 RMS symmetrical amperes at the voltage rating of the receptacle. |
| Temperature Rise | Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current. |
| Endurance | Mechanical: 10, 000 cycles, Electrical: 6, 000 cycles. |
| Impact Resistance | In accordance with UL746C |
| Cord Grip Retention | Per CSA C22.2 N0.182.1 / UL1682 |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49 and the harmonized European Standards. |
| Terminal Identification | Terminals identified in accordance with North American and International conventions. |
| Product Identification | Identification and ratings are a part of the external label and molded into the receptacle mount. |
| Moisture Resistance | Type 3, 4, 4X per UL 50 and CSA C22.2, No.94. |
| Ingress Protection | IP67 Suitability |
| Flammability | UL94-5VA and V-0 classification. |
| Operating Temperatures | Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact. |
| Hazardous Locations | Plugs Only- Class I, Division I & II, Groups B & C & D and Class II Division I & II, Groups F & G per UL 1010 & CSA 22.2, No.459. |
| UV Resistance | All materials are UV Stabilized. |
| Certifications | UL Listed, CSA Certified. |
| Device Description | The interchangeable product line, INSULGRIP pin and sleeve features metallic where you want it and non-metallic where you need it offers two different styles of grounding. |
| UPC Number | 78358501066 |
| Weight in LBs | 2.85 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read more
#1024244
Brand
Hubbell Wiring
Model
HBL560CS1WR
#1030231
Brand
Hubbell Wiring
Model
IN560MS1
#1024266
Brand
Hubbell Wiring
Model
HBL560PS1W
| Brand | Gates Rubber |
| Model | 8MGT-640-36 |
| Brand | Antaira |
| Model | LNP-1002G-10G-SFP |
| Brand | POBCO |
| Model | GAU161604L120 |
| Brand | NSI Industries |
| Model | GP-2 |
| Brand | Dixon Sanitary Fittings |
| Model | B54BMP-LX300 |
| Brand | Dixon |
| Model | STV80CS |
| Brand | RAB Lighting |
| Model | ALED5T52W |
| Brand | Remke |
| Model | 204P0010N1 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/