Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL7314GCB LKG CONN 2P3W 20A 3PH 250V B/W
MODEL HBL7314GCB
This vendor has a minimum order quantity of 7. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$62.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 7
Typically Ships in: 1 day
Returnable: See conditions
Amperage
20 A
Cable range
0.360 - 0.930 in
Color
Black, White
Connectivity
Pressure Terminal Screws
Cord dia
325 in-0.930 in
Cord range
0.360 in-0.930 in (9-24)
Current / amperage rating
20 A
Current rating
20 A
Dielectric strength
Withstands 2,000V minimum
Dimensions
1.94 in x 1.94 in x 3.61 in
Environmental conditions
Indoor Dry Unless Protected By Additional Means
Height
3.61 in
Insulation
Insulated Body
Length
1.94 in
Material
Nylon
Material - mounting hardware
Cord Mounted
Nema Rating
Non-NEMA
Number of poles
2-Pole
Number of wires
3-Wire
Operating temperature
Maximum continuous 75C and minimum -40C without Impact
Temperature rating
-40 C w/o impact, -25 with impact.
Voltage
250 VAC
Voltage rating description
250 VAC
Width (in)
1.94
Wire size
#16 AWG to #8 AWG
2P3W, 20A 250V, Non-NEMA, Black & White Nylon
Specifications
| Product Type | |
|---|---|
| Product Item | Connector Body |
| Wiring Scheme | 2-Pole, 3-Wire Grounding |
| Multi-Rating | 20A, 250V |
| Item Style | Insulgrip |
| Device Color | Black/White |
| Cord Dia. | .325"-.930" (8-24) |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Black nylon |
| Cord Clamp Material | Natural (white) nylon |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (green finish) Multi-drive |
| Cord Clamp Screw Material | Steel, zinc plated Multi-drive |
| Body Holding Screw Material | Steel, zinc plated Multi-drive |
| Body Contact Carrier Material | Natural White Nylon |
| Contact Spring Material | Brass |
| Spring Binding Plate Material | Brass |
| Ground Contact Material | .031" (.8) Brass |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
| Terminal Accommodation | 20A #12 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| UPC Number | 783585037523 |
| Weight in LBs | 0.35 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreBrand
Hubbell Wiring
Model
HBL2341
Brand
Hubbell Wiring
Model
HBL2623
Brand
Hubbell Wiring
Model
HBL7413C
Brand
Hubbell Wiring
Model
HBL3723
Brand
Hubbell Wiring
Model
HBL2611BK
| Brand | Kipp |
| Model | K2122.25211A4X50 |
| Brand | GPI |
| Model | 120501-3 |
| Brand | Sunex Tools |
| Model | 5153DD |
| Brand | Dodge |
| Model | 26ZRISER |
| Brand | U.S.Tsubaki |
| Model | 50H15 |
| Brand | Kipp |
| Model | K0123.1A02X20 |
| Brand | Champion |
| Model | 705SP-5/64 |
| Brand | Renold Jeffrey |
| Model | 10603001 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/