MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL7413C LKG CONN 4P4W 20A 120/208V BK
MODEL HBL7413C
This vendor has a minimum order quantity of 7. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$70.21 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Brand Minimum Order Quantity: 7
Typically Ships in: 1 day
Returnable: See conditions
Amperage
20 A
Cable range
0.350 - 1.150 in
Connectivity
Pressure Terminal Screws
Cord dia
35 in-1.15 in
Cord range
0.350 in-1.150 in (9-29)
Current / amperage rating
20 A
Current rating
20 A
Dielectric strength
Withstands 2,000V minimum
Dimensions
2.33 in x 2.33 in x 3.86 in
Environmental conditions
Indoor Dry Unless Protected By Additional Means
Height
3.86 in
Insulation
Insulated Body
Length
2.33 in
Material
Nylon
Material - mounting hardware
Cord Mounted
Nema Rating
Non-NEMA
Number of poles
4-Pole
Number of wires
4-Wire
Operating temperature
Maximum continuous 75C and minimum -40C without Impact
Phase
Three phase
Temperature rating
-40 C w/o impact, -25 with impact.
Type
Connector Body
Voltage
3 Phase WYE 120/208 VAC
Voltage rating description
3 Phase WYE 120/208 VAC
Width (in)
2.33
Wire size
#16 AWG to #8 AWG
4P4W, 20A 3PH 120/208V AC, Non-NEMA, Black & White Nylon
Specifications
| Product Type | |
|---|---|
| Product Item | Connector Body |
| Wiring Scheme | 4-Pole, 4-Wire Non-Grounding |
| Amperage | 20A |
| Voltage | 3 Phase Y 120/208V AC |
| NEMA Configuration | Non-NEMA |
| Item Style | Insulgrip |
| Device Color | Black/White |
| Cord Dia. | .35"-1.15" (9-29) |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Black nylon |
| Cord Clamp Material | Natural (white) nylon |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Cord Clamp Screw Material | Steel, zinc plated Multi-drive |
| Body Holding Screw Material | Steel, zinc plated Multi-drive |
| Body Contact Carrier Material | Natural White Nylon |
| Contact Spring Material | Brass |
| Spring Binding Plate Material | Brass |
| Ground Contact Material | .031" (.8) Brass |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
| Terminal Accommodation | 20A #12 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| Listings | UL |
| UPC Number | 783585037585 |
| Weight in LBs | 0.4 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read more
#1025290
Brand
Hubbell Wiring
Model
HBL7413C
#1020394
Brand
Hubbell Wiring
Model
HBL2311BK
#1020614
Brand
Hubbell Wiring
Model
HBL2351
#1020523
Brand
Hubbell Wiring
Model
HBL2323
#1020627
Brand
Hubbell Wiring
Model
HBL2363
| Brand | Jason Industrial |
| Model | D750H600 |
| Brand | Allen Bradley |
| Model | 509-AOD |
| Brand | SMC |
| Model | CDRBS30-90-M9B |
| Brand | Dodge |
| Model | 17A05L14WP |
| Brand | Electra/Grove Gear |
| Model | GR8520004.00 |
| Brand | ABB |
| Model | BJD6-5 |
| Brand | SKF Bearing |
| Model | PWM 607060 |
| Brand | Cutting Tool Technologies |
| Model | W1012 |
SKU: 1019832
The right stuff
Worry free order. Came fast and exactly as described. Will use MRO again.
Read moreSKU: 5017805
Helpful and good service
Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/