Add products to your shopping cart



Image for Illustration purposes only. Actual product may vary

Hubbell Wiring HBL460P7W PS IEC PLUG 3P4W 60A 3P 480V W/T

View additional description
  • Typically ships in: 1 day
  • Weight: 2.3 lb

$314.29 Each

Select Quantity

Unit of measure: each

Returnable: See conditions

Payment methods:

Additional Description

Watertight IEC Pin and Sleeve Plug, 3P4W, 60A 3PH 480V

Product Type  
IEC Product Type  Watertight
Service Style  Standard
Device  Plug
Amperage  60A
Voltage  3 Phase 480V
Poles and Wires  3 Pole, 4 Wire
Terminal Accommodations  #8 To #2 AWG copper wire only
Cord clamp range  .500" To 1.450"
Replacement Interior Number  IN460DM
Housing  Zytel 801 Nylon
Lock Ring  Rynite SST35
Contact Carrier  High-Impact Thermoset
Retainer  High-Impact Thermoset
Ground/Phase Pins  Brass
Terminal Screws  Stainless Steel (300 series)
Assembly Screws  Stainless Steel (300 series)
Cord Clamps  Rynite SST35
Grommet/Glands  Solid Neoprene
Gland Cap  Rynite SST35
Cord Clamp Screws  Stainless Steel (300 Series)
Clamp Nut  Nickel Plated Brass
Certification  UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC
Dielectric Withstand Voltage  Withstands 3,000V AC
Max Working Voltage  600V RMS (i.e.minimum creepage distance 10 mm minimum)
Current Interrupting  Certified for current interrupting at full rated current.
Temperature Rise  Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
Endurance  5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.
Impact Resistance  Per CSA C22.2 No. 182.1 / UL1682.
Cord Grip Retention  Per CSA C22.2 No. 182.1 / UL1682.
Cord Accommodation  Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
Terminal Identification  Terminals identified in accordance with North American and IEC conventions.
Product Identification  Identification and ratings are a permanent part of the device housing.
Moisture Resistance  Watertight per IEC 60309-1
Ingress Protection  IP 67 Suitability
Flammability  HB or Better per UL 94 or CSA C22.2 No. 0.17
Operating Temperatures  Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.
Certifications  UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL 1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets and LR285C for Receptacle CSA Standard C22.2 No. 182.2, UL Classified to IEC 309-1 and
Device Description  Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
UPC Number  78358540486
Weight in LBs  2.25


Amperage 60A
Voltage 3 Phase 480V

SKU: 1100550

Not bad

Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.

Read more

SKU: 5017805

Helpful and good service

Even when I mistakenly ordered the incorrect product, they quickly organised the RMA and paperwork so I could ship right back. Found them very helpful

Read more

Return policy

Item must be unused.

Item must be in it's original package.

Restocking, shipping and handling fees may apply to any return with this manufacturer.

For more information please consult

Product's availability

State of California Proposition 65 Product Warning