We never sell your data to third parties
Dixon 4FB4 F-Series Pneumatic Manual Push-Loc Hose Barb Coupler
MODEL 4FB4
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 8779634966
$29.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable: See conditions
California Prop 65 warning
#2933492
Brand
Dixon
Model
4FB4
#2933266
Brand
Dixon
Model
3DS3-B
#2933267
Brand
Dixon
Model
3DS3-S
#2932953
Brand
Dixon
Model
2FS3-S
Body Size
1/2 in
Hex
1 in
Hose I.D.
1/2 in
Length
3.40 in (86.4 mm)
Material
Steel
Max OD
1.19 in (30.2 mm)
Pressure Rating
See Product Details
Temperature range
-40F to 250F (-40C to 121C)
Compatibility & Interchange Data
- Foster 3, 4, 5 and 6 Series
- Parker 20-Series Manual Interchange
- Hansen 1000, 400 and 500
Construction
- Machined components are manufactured using solid bar stock.
- Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
- Nitrile (Nitrile Rubber) seals are standard
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
- Steel sleeve and steel tubular valve
How It Works
- To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
- Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
- After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
- After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety Notes
- It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
- Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
- Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
Specifications
Rated pressure for connected Steel Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 15, 500 PSI (1, 070 bar) Burst
Use
Can be used with DQC J-series Automotive plugs
Crimps!
Verified · SKU 105947The dies work, MRO ... the retailer ... nice ... quick ... good price and delivered in days Read more
Reasonable and reasonably fast shipping
Verified · SKU 115099My order was processed very quickly even with the changes I made on my original order with friendly people at MRO Read more
Dixon hose barbs
Verified · SKU 6053348The products were as advertised and order processing and delivery was fast and efficient. Read more
Solid valve!
Verified · SKU 107691I use these valves as the trigger for some flame effects. They snap back quickly and don't wear out or pass center and leak like cheaper versions. Best bang for your buck! Read more
