MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
SKF THHP 300 MPa Hydraulic Pump
MODEL THHP 300
$8,696.97 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
1st Stage Volume Per Stroke
40 cm³, below 1.6 MPa
2nd Stage Volume Per Stroke
0.5 cm³, above 1.6 MPa
Case Dimensions (l X H X W)
920 x 318 x 380 mm
Colour
Blue;Black
Connection Nipple
G1/4 (male) and G3/4 (male)
Dimensions (W X L X H)
130 x 574 x 200 mm
Filled with Oil
Yes, with SKF Mounting Fluid LHMF 300
Handle Force at Maximum Oil Pressure
390 N
Hose Length
2000 mm
Housing
light aluminum engineering alloy
Maximum Pressure
300 MPa
Oil Container Capacity
1600 ml
Operating Temperature Range
10-35 °C
Pack Height
220 mm
Pack Length
700 mm
Pack Width
130 mm
Pressure Gauge
Yes, analogue
Product Weight
7.5 kg
Recommended Storage Temperature
10-40 °C
Relative Humidity
0 to 75%, non-condensing
Suitable for Drive up Method
No
Suitable for Hydraulic Nut HMV - Largest
54
Suitable for Hydraulic Nut HMV - Smallest
10
Type
Hand operated pump
Type of Pump
Two stage
Hydraulic pump with large oil container
The THHP 300 is a high pressure, easy-to-connect manual hydraulic pump, suitable for many applications using the SKF Oil Injection Method, for oil pressures up to 3000 bar (300 MPa / 43500 psi). The two stage pump includes a 0-300 MPa (0-43500 psi) pressure gauge, a high-pressure hose, a quick connection coupling and various nipples to connect to the most common applications. Supplied in a sturdy carrying case. Connection nipples enable both G1/4 and G3/4 connections.
- Two stage pump designed to quickly reach high pressures up to 3000 bar (300 MPa / 43500 psi)
- Large, mounted gauge shows pressures over the full pressure range
- Glycerine filled pressure gauge dampens shocks and pressure peaks, giving longer service life and is easier to read
- Designed to reduce the risk of oil leaking into the environment
| Brand | Wichita Clutch |
| Model | 20000711 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF