303E 1 PULLEY
BRAND: LoveJoy | MODEL: 68514418817 | CONDITION: NEW | SKU: 1798944
Image for Illustration purposes only,
Actual product may vary
Wide Variable Speed Belts
1/3 through 15 HP
Pulleys in the WB series use wide variable speed belts for the most efficient
transmission of torque through the widest possible speed range. These pulleys
are two-side moveable for the best possible belt alignment when used with a
grooved companion sheave. However, the location of the belt centerline close
to the bore end of the pulley reduces the overhung load on motor bearings and
seals. Precision-calibrated springs maintain correct pressure, keeping the belt
properly tensioned and minimizing belt slip.
WB pulleys can be used on both adjustable and fixed center drives. They offer
maximum service when lubricated through a convenient grease fitting and
occasionally run through the speed range.
WB pulleys offer optimum speed ratios because they are used with wide
variable speed belts. Pulley flanges are designed to match standard belt angle
and width, so each pulley model must be matched to the correct belt to insure
full speed range and maximum torque capacity.
Adjustable Center Drives
The typical adjustable center drive consists of: the WB pulley mounted on the
motor shaft; a grooved companion sheave mounted with a bushing on the
driven shaft; an adjustable motor base; and a variable speed belt. A wide range
of pulley sizes and horsepower ratings are available from the WB series to fit
the system requirements, and Lovejoy offers the correct drive belt, companion
sheave, bushing, and motor base to complete the package.
Fixed Center Drives
Fixed center, or compound, drives offer greater driven speed ranges in a
compact space. A fixed center drive consisting of a WB spring-loaded pulley and
an adjustable pulley to match offers the best possible package for “C” mount
configurations where zero offset is critical. Zero offset means that the driver
and driven units are in line with one another, and the driven pulley is mounted
in such a way that the belt rides as close as possible to the driven unit. This
reduces overhung load and provides a smoother running drive. Three WB fixed
center drive packages are available, from 1/3 through 3 HP.
|Description||303E 1" PULLEY|
|Drive Type||Adjustable Center - Driver|
|Bore Diameter||1 in|
|Keyway Size||1/4 x 1/8 in|
|Overall Width||3.680 in|
|Outside Diameter (Dimension C)||10.000 in|
|Max. Pitch Diameter (Dimension PD)||9.700 in|
|Min. Pitch Diameter (Dimension PD)||2.800 in|
|Overall Length||8.750 in|
|Cubic inches||875.00000 in³|
|Torque Capacity||108.00 in·lb|
|Motor Power at 1,150 rpm||2.00 hp|
|Motor Power at 1,750 rpm||3.00 hp|
- Sizes range from 6 to 13 inches in diameter
- Ratings to 15 HP
- Made of durable cast iron flanges (if greater than 1 HP)
- Lightweight, corrosion-resistant anodized aluminum flanges on Models 245 and 260
- Precision balanced for smooth operation
|Location||Availability (pcs)||Cutoff Time||Status|
|Product Availability is updated each morning, Inventory is subject to change|
|South Haven, MI||Chat with Sales||3 p.m.||-|
|MRO - Bakersfield, CA||Chat with Sales||3 p.m.||-|
|MRO - Firebaugh, CA||Chat with Sales||3 p.m.||-|
|MRO - Los Angeles, CA||Chat with Sales||3 p.m.||-|
|Alpharetta, GA||Chat with Sales||3 p.m.||-|
|Dallas, TX||Chat with Sales||3 p.m.||-|
|Downers Grove, IL||Chat with Sales||3 p.m.||-|
- MRO - Bakersfield, CA
- MRO - Firebaugh, CA
- MRO - Los Angeles, CA
- Alpharetta, GA
- Dallas, TX
- Downers Grove, IL
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/
SHIPPING & DELIVERY
- Where do orders ship from?
- When do I receive my order?
- What happens when the lead time is too high?
- Can I pick up items locally / will call?
- Can it be shipped today?
- Can I use my own shipping account?
- Does “Usually ships in 24 hours” mean it’s in stock?
- Can we ship outside the US / Export?
PAYMENT, PRICING & TAXES
- When I do get charged for my order?
- What are the accepted payment methods?
- Do you provide credit terms?
- Is the order price set or can it change?
- Can I get a discounted price?
- Is there a special price for resellers/government?
- How do I get sales tax reduction?
RETURNS & REFUNDS
NEED MORE HELP
Who is MROSupply.com?
MROsupply.com is the e-commerce extension of Mechanical Drives and Belting, established in 1898 in Los Angeles (yes, 1898, not 1998). Currently, we have nearly 700,000 parts online and are adding more every day, however we have over 4,000,000 products that still need to be added. If you don't find what you're looking for, send us an email or fire up our live chat feature and we will be sure to help. Learn more on our About Us.
What is the typical order process?
Once you have placed your order, the vast majority of orders go through this process:
- Order Acknowledgement (immediately after an order is placed online)
- Order Confirmation (we confirm to you via email that the order was received and placed)
- Order Tracking Email (We email you the tracking number via UPS, FedEx, etc.)
- Order Complete
Can I place an order by phone?
We accept orders by phone that have a subtotal above $2000 USD
What happens if I made a mistake?
Not to worry. In some cases, such as special voltage motors or other parts which are commonly ordered by mistake, a confirmation email will be dispatched to notify you. If we don't receive a response within 48 hours, we will proceed with the order as planned.
SHIPPING & DELIVERY
Where do orders ship from?
Orders may come from our warehouse, or if there is a closer drop ship location from our suppliers. We will always look to the latter option and ship from as nearby as possible. Most of our vendors have multiple drop ship warehouse locations and most can ship within the same day or 24 hours.
When do I receive my order?
Orders usually ship within 24 hours and a confirmation email follows immediately thereafter. If lead time is from 2-3 days up to 2 weeks, you'll be notified via email with an option to cancel. If we've received no cancellation upon 48 hours of placement, then the order will be processed.
What happens when the lead time is too high?
If your order has over 2 weeks lead time it will be put on hold with an option to cancel, move forward with usual shipping or expedite for faster delivery. You'll receive an email asking for your approval on how to proceed with the order. The order will be cancelled if you don't provide approval within 48 hours, and you'll be notified you via email.
Can I pick up items locally / will call?
In some cases yes, but it depends on the brand and in which warehouse the products will be picked up. If the product has a "Local Pickup" option in the Shipping section of the Cart page, then the answer is YES. In other cases, please inquire with orders over $1000 USD.
Can it be shipped today?
It depends on the shipping location. Most warehouses have a cutoff time of about 2‐4 PM in their timezone. Our shipping warehouses are spread across the country, so often times West Coast customers are at the mercy of East Coast shipping cutoff times. Other brands may have multiple stocking locations, so it's best to check by email or phone ahead of time if the product/s is needed urgently.
Can I use my own shipping account?
Yes - In order to do so, please notice a section in the cart process, during the shipping portion that says "Account Number". Be sure to select the appropriate shipping type first (i.e. FedEx, UPS, etc)
Does “Usually ships in 24 hours” mean it’s in stock?
It only means that if it's in stock, we will usually ship it within 24 hours of the order. Please be sure to contact us if you want to check stock before ordering. From our experience, most products tend to ship same day or within 24 hours, but with hundreds of thousands of products, it can be very difficult to predict availability on each part.
Can you ship outside the US / Export?
Our current minimum export amount is $2000 USD, and the only paperwork to be provided is a Commercial Invoice and Packing Slip. We may provide a shipping option to some countries or additional paperwork, depending on the size of the order and country specifics.
PAYMENT, PRICING & TAXES
When I do get charged for my order?
Orders are to be charged within 24 hours after placement, not upon shipment.
What are the accepted payment methods?
We accept all major credit cards (Visa, MasterCard, Discover, American Express) and PayPal secure payments.
Do you provide credit terms?
Is the order price set or can it change?
In very rare instances prices may be subject to change after order. You'll be notified via email and new charges are put on hold pending your approval.
Can I get a discounted price?
Typically the order must be around $2000 in order to receive consideration for a lower price. There is also a number of products we may be aggressively promoting thus they may have a temporary price drop or promotion, such as Free Shipping.
Is there a special price for resellers/government?
No, we offer our lowest prices online unless there is a larger order quantity, in which case, please see question "Can I get a discounted price?".
How do I get sales tax reduction?
If you live in the state of California, your purchase is subject to Sales Tax. When purchasing items for resale, registered sellers may avoid the sales tax by giving their supplier adequate documentation in the form of a resale certificate. The certificate may be in any form, but here is a standard blank certificate for your use. Once completed, simply upload it while you're checking out and we will immediately apply sales tax reduction.
RETURNS & REFUNDS
Returns for MROSupply.com Products
Returns for MROSupply.com products must be made within 30 days of purchase. (If your purchase is over 30 days, mention it in your request as, in some cases, we might be able to still process your return). For more see our Returns/Warranty Policy and our Request Form.
Defective product returns
Because MROSupply.com represents such a large range and quantity of products, it is currently not possible for us to publish each item's manufacturer's warranty. Be assured your satisfaction is our number one priority and we will do everything possible to assist you with a warranty claim. For more see our Returns/Warranty Policy and our Request Form.