We never sell your data to third parties
Dodge 20Q15L56 TIGEAR-2 worm gear speed reducer with 15:1 ratio, 2" center distance, left side solid output shaft, quill input, and 56C frame. 1" output shaft diameter, 1.69 HP input rating, 117 rpm maximum output speed. Cast iron housing with green paint, maintenance-free design.
MODEL 20Q15L56
Contact supplier for technical support on: +1-864-284-5700
$905.46 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.2400 in, 56.896 mm
Case size
20
Center Distance
2" (case size 20)
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Center to end of shaft distance
4.6900 in, 119.126 mm
Finish
Green
Frame
56C motor flange mount
Gear Ratio
15:1 reduction
Horsepower rating input
1.6900 hp, 1.26 kW
Horsepower rating output
1.4600 hp, 1.089 kW
Housing
Cast iron
Housing material
Cast iron
Input
Quill type
Input flange
56C
Input HP
1.69
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
117 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
15
Output
Left side solid shaft, 1.0000" diameter
Output bore/shaft diameter
1 in
Output horse power
1.46
Output shaft center to input motor mounting face distance
5.0000 in, 127.0 mm
Output style
Left
Output Torque
790 in-lb
Overhung load
1560 lbf, 6939.226 N
Paint type
Standard
Paint/coating
Green
Power Rating
1.69 HP input capacity
Product Type
TIGEAR-2 right-angle worm gear speed reducer
Rated torque output
790 in/lb, 790.0 in/lb
Ratio
15 to 1
Seal type
Single-lip contact
Shaft diameter output
1.0000 in, 25.4 mm
Shaft length output
2.1100 in, 53.594 mm
Suitable for washdown
No
Thermal horsepower rating
2.5200 hp, 1.879 kW
Specifications
- Catalog Number: 20Q15L56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 15:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2"
- Case Size: 20
- Housing Material: Cast Iron
- Paint: Green
- Weight: 30.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#142694
Brand
Dodge
Model
20BASE
#149454
Brand
Dodge
Model
20Q20R56
#119175
Brand
Dodge
Model
207156
#117310
Brand
Dodge
Model
202A10L56
#5004019
Brand
Dodge
Model
202A20R14
#2286119
Brand
Browning
Model
1011246
#1341594
Brand
Electra/Grove Gear
Model
GRL8210112.00
#1341522
Brand
Electra/Grove Gear
Model
GRL8210040.00
#6000230
Brand
Winsmith
Model
U2015SL56
| Brand | Hubbell Wiring |
| Model | GFRST20NL |
| Brand | Harwal |
| Model | 50 x 60 x 7/10W4 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/