We never sell your data to third parties
Dodge 40A15R18 TIGEAR-2 worm gear speed reducer with 15:1 ratio, 3-piece coupled input, right side solid output shaft, 180TC flange, and 4" center distance. Cast iron housing with green paint. Input horsepower 11.36, output horsepower 10.24, output shaft diameter 1.875".
MODEL 40A15R18
Contact supplier for technical support on: +1-864-284-5700
$4,338.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
4.4400 in, 112.776 mm
Case size
40
Center Distance
4" case size
Center distance (in)
4 in, Center distance (in):4.0000 in, 101.6 mm
Center to end of shaft distance
8.1200 in, 206.248 mm
Finish
Green
Frame
180TC NEMA C-face motor flange
Gear Type
Worm gear right-angle reduction
Gearbox component type
Gearbox
Horsepower rating input
10.0100 hp, 7.464 kW
Horsepower rating output
8.8900 hp, 6.629 kW
Housing
Cast iron
Housing material
Cast iron
Input
3-piece coupled
Input flange
180TC
Input HP
11.36
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
5.0000 in, 127.0 mm
Nominal ratio
15
Output
Right side solid shaft, 1.8750" diameter
Output bore/shaft diameter
1.875 in
Output horse power
10.24
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
12.5700 in, 319.278 mm
Output style
Right
Output Torque
4, 804 in-lb
Overhung load
4190 lbf, 18638.049 N
Paint type
Standard
Paint/coating
Green
Power Rating
11.36 HP input capacity
Rated torque output
4804 in/lb, 4804.0 in/lb
Ratio
15:1 speed reduction
Seal type
Single-lip contact
Shaft diameter output
1.8750 in, 47.625 mm
Shaft length output
3.7600 in, 95.504 mm
Suitable for washdown
No
Thermal horsepower rating
10.1600 hp, 7.576 kW
Specifications
- Catalog Number: 40A15R18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 15:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.875"
- Input Style: 3-Piece Coupled
- Frame: 180TC
- Center Distance: 4"
- Case Size: 40
- Housing Material: Cast Iron
- Paint: Green
- Weight: 144.0000 lb
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#143709
Brand
Dodge
Model
40A15R18
#143685
Brand
Dodge
Model
40A05LR21
#783460
Brand
Dodge
Model
40Q60L14
#143706
Brand
Dodge
Model
40A10R21
#148892
Brand
Dodge
Model
40Q50R18
#1334199
Brand
Electra/Grove Gear
Model
GR8420124.00
| Brand | MROSupply Fasteners |
| Model | FSTPCK-858200 |
| Brand | KSM |
| Model | 5203 ZZ |
| Brand | Pyramex |
| Model | GL102S |
| Brand | Gates Rubber |
| Model | 122MXL025 |
SKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/