We never sell your data to third parties
Dodge 40A07L25 TIGEAR-2 worm gear speed reducer with 7:1 ratio, 3-piece coupled input, left side solid output shaft, 250TC flange, and 4" center distance. Cast iron housing with green finish. 16.38 HP input, 15.27 HP output, 1.875" output shaft diameter. Suitable for industrial power transmission applications requiring right-angle speed reduction.
MODEL 40A07L25
Contact supplier for technical support on: +1-864-284-5700
$4,780.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#143779
Brand
Dodge
Model
40S40LR
#148892
Brand
Dodge
Model
40Q50R18
#143706
Brand
Dodge
Model
40A10R21
#143707
Brand
Dodge
Model
40A15LR18
Base to output center height
4.4400 in, 112.776 mm
Case size
40
Center Distance
4" case size 40
Center distance (in)
4 in, Center distance (in):4.0000 in, 101.6 mm
Center to end of shaft distance
8.1200 in, 206.248 mm
Finish
Green
Frame
250TC NEMA motor flange compatibility
Gearbox component type
Gearbox
Horsepower rating input
16.3800 hp, 12.215 kW
Horsepower rating output
15.2700 hp, 11.387 kW
Housing
Cast iron
Housing material
Cast iron
Input
250TC Flange
Input flange
250TC
Input HP
16.38
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 250TC frame
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
5.0000 in, 127.0 mm
Nominal ratio
7
Output
Left side solid shaft, 1.875" diameter
Output bore/shaft diameter
1.875 in
Output horse power
15.27
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
13.8700 in, 352.298 mm
Output style
Left
Output Torque
4, 071 in-lb
Overhung load
3280 lbf, 14590.167 N
Paint type
Standard
Paint/coating
Green
Power Rating
16.38 HP input capacity
Rated torque output
4071 in/lb, 4071.0 in/lb
Ratio
7:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.8750 in, 47.625 mm
Shaft length output
3.7600 in, 95.504 mm
Suitable for washdown
No
Thermal horsepower rating
17.5600 hp, 13.094 kW
Specifications
- Catalog Number: 40A07L25
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 7:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.875"
- Input Style: 3-Piece Coupled
- Frame: 250TC
- Center Distance: 4"
- Case Size: 40
- Housing Material: Cast Iron
- Paint: Green
- Weight: 144.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | PIP |
| Model | 4035FR/2XL |
| Brand | JW Winco |
| Model | 6TA08O |
| Brand | Red Lion Controls |
| Model | RT100000 |
| Brand | Martin Sprocket |
| Model | 20TFS7 |
| Brand | PIP |
| Model | 3652/2XL |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/