We never sell your data to third parties
Dodge 17A10L56 TIGEAR-2 worm gear speed reducer with 10:1 ratio, 3-piece coupled input, left side solid output shaft, 56C flange, and 1.7" center distance. Class 30 grey iron housing with green paint finish. 1.67 HP input rating, 1.48 HP output, 0.875" output shaft diameter, and 175 rpm maximum output speed. Suitable for right-angle power transmission in industrial applications.
MODEL 17A10L56
Contact supplier for technical support on: +1-864-284-5700
$951.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#151355
Brand
Dodge
Model
17Q10L56
#142993
Brand
Dodge
Model
17S40L
#142980
Brand
Dodge
Model
17S05L
#151676
Brand
Dodge
Model
17A10L56
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center Distance
1.7" compact footprint
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Green
Frame
56C motor flange compatibility
Gear Type
Right-angle worm gear
Gearbox component type
Gearbox
Horsepower rating input
1.6700 hp, 1.245 kW
Horsepower rating output
1.4800 hp, 1.104 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
1.67
Input style
3-Piece coupled
Input Style
3-piece coupled input
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
175 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
10
Output
Left side solid output shaft, 0.8750" diameter
Output bore/shaft diameter
0.875 in
Output horse power
1.48
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
7.7300 in, 196.342 mm
Output style
Left
Overhung load
1190 lbf, 5293.384 N
Paint type
Standard
Paint/coating
Green
Power Rating
1.67 HP input capacity
Rated torque output
534 in/lb, 534.0 in/lb
Ratio
10:1 reduction ratio
Seal type
Single-lip contact
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
No
Thermal horsepower rating
2.7600 hp, 2.058 kW
Torque Output
534 in-lb continuous torque
Specifications
- Catalog Number: 17A10L56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 0.875"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 1.7"
- Case Size: 17
- Housing Material: Cast Iron
- Paint: Green
- Weight: 46.0000 lb
How should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5999945
Brand
Winsmith
Model
U1810SL56
| Brand | Rollway |
| Model | M 12649/10 |
| Brand | E-Z Lok |
| Model | SK51220 |
| Brand | E-Z Lok |
| Model | 653-14 |
| Brand | BLACKSTAR |
| Model | BLS H80SF24 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/