We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 23S25LWP TIGEAR-2 worm gear speed reducer, 25:1 ratio, 2.3" center distance, left side solid output shaft, separate input, cast iron housing, white paint. 1.65 HP rating, 1184 in-lb output torque. Ventless design. - Ratio: 25:1
- Center Distance: 2.3"
- Input: 0.875" Input Shaft
- Output Bore/Shaft Diameter: 1.25"
- Output: Left Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 1.65
- Output Horse Power: 1.32
MODEL 23S25LWP
Contact supplier for technical support on: +1-864-284-5700
$1,100.23 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.5000 in, 63.5 mm
Case size
23
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Finish
White epoxy
Horsepower rating input
1.6500 hp, 1.23 kW
Horsepower rating output
1.3200 hp, 0.984 kW
Housing material
Cast iron
Input
0.875 in Input Shaft
Input HP
1.65
Input style
Separate, Input style:Solid input shaft
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
25
Output
Left side solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
1.32
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
1184 in/lb, 1184.0 in/lb
Ratio
25 to 1
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length input
1.1700 in, 29.718 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
No
Thermal horsepower rating
2.1600 hp, 1.611 kW
- Gear Type: Worm gear, right-angle configuration
- Ratio: 25:1 speed reduction
- Center Distance: 2.3 inches
- Output: Left side solid output shaft, 1.1250" diameter
- Input: Separate input shaft for belt-driven applications
- Performance: 1.65 HP input rating, 1184 in-lb output torque
- Housing: Cast iron construction with white paint finish
- Applications: Belt conveyors, mixers, packaging equipment, food processing machinery
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#144477
Brand
Dodge
Model
23AZ10R18WP
#5009300
Brand
Dodge
Model
23QZ05LR56WP
#142645
Brand
Dodge
Model
23ZBASEWP
#5007588
Brand
Dodge
Model
232Q20L14WP
#152047
Brand
Dodge
Model
23QZ05LR14WP
#153622
Brand
Dodge
Model
23S25L
#6000635
Brand
Winsmith
Model
U2425SL00
| Brand | E-Z Lok |
| Model | 303-5 |
| Brand | Gates Rubber |
| Model | 1626V455 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/