We never sell your data to third parties
Dodge 23Q40H56LT 23Q40H56 TIGEAR-2 worm gear speed reducer, 40:1 ratio, hollow bore output with 1.4375" bore, 56C flange input, 2.3" center distance, cast iron housing, green paint. Quill input design for compact motor mounting. Input horsepower 1.11, output horsepower 0.83. Suitable for right-angle power transmission in industrial applications.
MODEL 23Q40H56LT
Contact supplier for technical support on: +1-864-284-5700
$1,384.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.5000 in, 63.5 mm
Bore dia output
1.4380 in, 36.525 mm
Bore length
6.6200 in, 168.148 mm
Case size
23
Center Distance
2.3"
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Frame
56C NEMA flange mounting
Gear Type
Right-angle worm gear
Horsepower rating input
1.1100 hp, 0.828 kW
Horsepower rating output
0.8300 hp, 0.619 kW
Housing
Cast iron
Housing material
Cast iron
HP Rating
1.11 HP input capacity
Input
Quill type
Input HP
1.11
Input style
Quill
Lubrication type
PAG, low temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
40
Output
1-7/16" hollow bore
Output bore/shaft diameter
1.4375 in
Output horse power
0.83
Output shaft center to input motor mounting face distance
5.4600 in, 138.684 mm
Output style
Hollow
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1193 in/lb, 1193.0 in/lb
Ratio
40:1 reduction ratio
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
1.7300 hp, 1.29 kW
Torque Rating
1, 193 in-lb output torque
Specifications
- Catalog Number: 23Q40H56LT
- Ratio: 40:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.4375"
- Input Style: 56C Flange
- Housing Material: Cast Iron
- Paint: Green
- Weight: 48.0000 lb
How should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#142487
Brand
Dodge
Model
23Q40H56
#142501
Brand
Dodge
Model
23Q40H56WP
#144022
Brand
Dodge
Model
23A40H56WP
#2248699
Brand
Dodge
Model
SS23Q40H56
#5009267
Brand
Dodge
Model
23Q40H56SHWP
#6000698
Brand
Winsmith
Model
U2440HM56
| Brand | PEER Bearing |
| Model | 6203 |
| Brand | PIP |
| Model | 380-800/13 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/