We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 123804 P2B-SC-014 two-bolt pillow block bearing features 7/8 inch (22.225mm) bore with 65 degree set screw locking. Cast iron housing with standard duty ball insert, DualGuard seals. 205 series non-expansion design rated to 4500 rpm. 7/8" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-SC-014
Contact supplier for technical support on: +1-864-284-5700
$88.93 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt centerline range
4 1/4 inch-4 1/2 inch
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
7/8 in
Bore length
1.3400 in, 34.036 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
7/8 inch
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Material
Steel
Max RPM
7500 rpm
Max Speed
4500 rpm
Measure system
Imperial
Relubrication
Yes
Rolling element
Standard duty ball
Seal
Single lip
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft centerline height
1 7/16 inch
Shaft diameter
0.8750 in
Standoff housing
No
Static load capacity
1769 lbf, 7868.904 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block with 2-bolt base mount
- Bore Diameter: 7/8 inch (22.225mm)
- Locking Type: 65 degree set screw for maximum shaft grip
- Housing Material: Cast iron Class 25/30
- Insert: Standard duty ball bearing with wide inner ring
- Duty Rating: Standard normal duty
- Series: 205 bearing series
- Sealing: DualGuard single lip seal with rubberized flinger
- Expansion: Non-expansion (fixed) bearing for shaft positioning
- Speed Rating: Up to 4500 rpm
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#123365
Brand
Dodge
Model
P2B-SC-014
#125539
Brand
Dodge
Model
P2B-DL-012
#125623
Brand
Dodge
Model
P2B-DLB-012
#126948
Brand
Dodge
Model
P2B-VSCB-012
#125286
Brand
Dodge
Model
P2B-SXVB-012
#2272198
Brand
Browning
Model
767644
#421634
Brand
SealMaster
Model
NP-14
#2272199
Brand
Browning
Model
766038
#132854
Brand
Dodge
Model
P2B-VSC-014
#498046
Brand
Link-Belt
Model
10411986
#131300
Brand
Dodge
Model
P2B-SCAH-014
#269506
Brand
NTN Bearing
Model
UCP-7/8
#1152995
Brand
IPTCI Bearing
Model
SBP 205 14 G
| Brand | Sunex Tools |
| Model | 315UM |
| Brand | Bondhus |
| Model | 00053 |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/