We never sell your data to third parties
Dodge 124445 FB-SC-104 three-bolt flanged bracket bearing with 1-1/4" bore, set screw locking, cast iron housing, standard duty ball bearing insert, DualGuard seals, 207 series, non-expansion fixed design for general purpose applications. 1-1/4" bore 3-Bolt Flange Bracket Ball Bearing with Set Screw locking used in General Purpose applications
MODEL FB-SC-104
Contact supplier for technical support on: +1-864-284-5700
$127.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
207 series
Bearing type
Ball, ball
Bolt Diameter
0.5000 in
Bolt to bolt max
2.0000 in, 50.8 mm
Bolt to bolt min
2.0000 in, 50.8 mm
Bore
1 1/4 in
Bore length
1.7100 in, 43.434 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Finish
Powder coated
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Flanged bracket
I.D.
1 1/4 in
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max RPM
5500 rpm
Max Speed
3500 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
DualGuard seals with flingers
Sensor ready
Adapter required
Shaft
Nitrile rubber
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Static load capacity
3461 lbf, 15395.295 N
Suitable for high temperature
No
Suitable for washdown
No
Type
3-bolt flange bracket
- Housing Type: Three-bolt flanged bracket mount
- Bore Diameter: 1-1/4" (31.75 mm)
- Locking Type: 65° set screw for maximum holding power
- Housing Material: Cast iron construction
- Duty Rating: Standard duty for general purpose applications
- Bearing Series: 207 series ball bearing insert
- Expansion Type: Non-expansion (fixed) design
- Seal Protection: DualGuard seals with flingers
- Max Speed: 3500 RPM
- Static Load Rating: 3461 lbf
- Applications: Ideal for surface mounting with triangular bolt pattern where pillow block mounting is not feasible
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#125539
Brand
Dodge
Model
P2B-DL-012
#123525
Brand
Dodge
Model
P2B-SCAH-012-FF
#125623
Brand
Dodge
Model
P2B-DLB-012
#123535
Brand
Dodge
Model
P2B-SCAH-012
#123526
Brand
Dodge
Model
P2B-SCAH-012-HT
#2257229
Brand
SealMaster
Model
701242
#125596
Brand
Dodge
Model
FB-DL-104
#2275642
Brand
Browning
Model
764441
#16176
Brand
AMI Bearings
Model
UCFB207-20
#12621
Brand
AMI Bearings
Model
UEFB207-20
#2257232
Brand
SealMaster
Model
705617
#490035
Brand
Link-Belt
Model
10422642
| Brand | Rollway |
| Model | 22338 CA C3 W33 |
| Brand | Allen Bradley |
| Model | 800MR-FXP16RAK |
| Brand | Chicago-Latrobe |
| Model | 48750 |
SKU: 117776
Purchase review
I received quick replies to any questions; delivery was on time and immediate. I am very satisfied with my experience with MRO Supply.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/